美国亚利桑那试验粉尘#IEC 60312试验粉尘#ISO 12103试验粉尘 4006306773;;60496773;,王，韩国ITC沙尘试验箱ISO 12103-1 A1 Ultrafine Test Dust；ISO 12103-1 A2 Fine Test Dust；ISO 12103-1 A3 Medium Test Dust ISO 12103-1；A4 Coarse Test Dust
5.8.1 Dust Tests.粉尘测试
Purpose: To determine if the enclosure provides sufficient protection from dust intrusion from
windblown sand and road dust to allow the DUTto continue to meet the performance requirements
specified in the CTS. The accumulation of dust on heat sink devices will adversely affect heat dissipation. Dust may also combine with humidity and salt to produce unintentional conductive paths. Dust accumulation will adversely affect electro-mechanical devices resulting in increased friction or complete blockage of motion.
目的:用来确定当有风沙和路面灰尘干扰时,附件能否提供充分的保护使得DUT继续达到CTS中所指明的运行要求。
Procedure （Operating Type 1.2）: Test according to ISO 20653 Protection against objects, water
and access. This test shall be conducted using ISO 12103-1, A2 Fine Grade Dust and should occur
for a period of 8 hours.
过程（操作方式1.2）：测试根据ISO20653针对水等物体的防护。测试须使用ISO12103-1,A2优良等级，同时，粉尘需持续8个小时。
Criteria: Functional Status shall be class A.
标准：功能状态须为A级
The DUT shall experience no damage, loss of function, or degradation of performance. The DUT shall pass the Functional/Parametric Test at the end of test prior to cleaning.
DUT应避免受损,破坏功能,或降解其性能。DUT在清洁前须通过功能/参数测试。
| 0微米至指定尺寸的等级 | |
| 名义尺寸范围 （µm） | 材料品种 |
| 0 – 5 | Fe2O3 （Hematite，赤铁矿） Fe3O4 （Magnetite，磁铁矿） |
| 0 – 10 | Fe2O3 （Hematite，赤铁矿） Fe3O4 （Magnetite，磁铁矿） |
| 可接受的尺寸范围是指0微米至指定的尺寸产品中，指定至少包含指定尺寸的颗粒的体积百分为96%。 | |
| 中等级别产品 | |||||||||||||||||||
| 名义尺寸范围 （µm） | 材料品种 | ||||||||||||||||||
| 5 – 10 | Fe2O3 （Hematite，赤铁矿） Fe3O4 （Magnetite，磁铁矿） | ||||||||||||||||||
中等级氧化铁产品按体积百分比计算，至少包含80%上面指定的尺寸的颗粒。
| |||||||||||||||||||
美国亚利桑那试验粉尘#IEC 60312试验粉尘#ISO 12103试验粉尘 4006306773;;60496773;,王，韩国ITC沙尘试验箱
品Pai:
美国PTI
型号:
ISO12103-1 A1 Ultra
ISO 12103-1 A1
Ultrafine Test Dust A1粉
PTI 是具备ISO
等级试验粉尘及特殊定制粉尘分布的制造商和商。具体请阅读：“试验粉尘的历史”来了解PTI在生产ISO12103-1标准中规定的4个等级试验粉尘的角色。专业的工程技术，良好的发展状态，保密产权程序的实施，彻底的分析调查及每个阶段材料处理的评估都让PTI对其客户无论从竞争者或增值服务都脱颖而出。
典型的化学成分分析
| 化学成分 | 重量百分比 | 化学成分 | 重量百分比 |
| Si02 | 68 - 76 | Ca0 | 2.0 - 5.0 |
| Al203 | 10 - 15 | Mg0 | 1.0 - 2.0 |
| Fe203 | 2 - 5 | Ti02 | 0.5 - 1.0 |
| Na20 | 2 - 4 | K20 | 2.0 - 5.0 |
*Loss on Ignition 2 – 5%
ISO
试验粉尘颗粒分布（体积百分比小于）
| 尺寸（微米） | ISO 12103-1, A1 超细试验粉尘 |
| 1 | 1.0 – 3.0 |
| 2 | 9.0 – 13.0 |
| 3 | 21.0 – 27.0 |
| 4 | 36.0 – 44.0 |
| 5 | 56.0 – 64.0 |
| 7 | 83.0 – 88.0 |
| 10 | 97.0 – 100 |
| 20 | 100 |
| 40 | -- |
| 80 | -- |
| 120 | -- |
PTI粉尘灰灰尘ACFTD灰尘ISO 12103-1 A2 Fine Test
Dust A2粉 ISO 12103-1 A4 Coarse Test Dust A4粉 ISO 12103-1 A3 Medium Test Dust
A3粉MTD粉尘 Arizona Test Dust Fractions 亚利桑那试验粉尘MIL 810E4 Silica Sand & Dust
Iron Oxide 波特兰水泥 Type IGlass Beads 玻璃珠 PV 树脂（喷融树脂） 汽车安全带测试粉尘ECE R16, Section 7.6.3.2 （GB 14166, Section 5.6.3.2液SoftC-2A Quartzose Mineral Dust DMT emission test dust （IEC 60312
5.1.2.5） Test Dust Type 8® DMT test dust type 8 （IEC 60312 5.1.2.3）
Quartzose Mineral DMT carpet test dust （IEC 60312 5.1.2.2） DMT Dolomite Sand （IEC 60312 5.1.2.1）A2 ISO 细灰 A4粗灰
亚利桑那沙子亚利桑那试验粉尘 美国ISO MTD粉尘A2测试粉A3中级试验粉尘AC DUST A2 粉尘 ISO 试验粉尘 亚力桑那A2粉尘
美国PTI碳黑粉尘 ISO 12103-2 M2铝粉 A2 ISO 细灰 ISO 12103-2 M3铝粉 ISO 12103-2 M4铝粉ISO
12103-2 M5铝粉JIS CLASS 2级粉尘 PTI 粉尘Nominal 0-5 Arizona Test Dust PTI 粉尘Nominal
10-20 Arizona Test Dust PTI 粗粉 PTI 粉尘Nominal 20-40 Arizona Test Dust
试验用粉尘12103-1 A2类粗粉粗灰美国亚利桑那A1粉 FLY ASH 飞灰Portland Cement波特兰水泥美国亚利桑那M5粉APPIE JIS
Z 8901 CLASS 1 试验粉尘APPIE JIS试验用粉体1 8种APPIE关东粉APPIE JIS test powders 1 class8
日本粉体工业技术协会APPIE APPIE JIS Z 8901 试验用粉体1，CLASS 8 APPIE JIS Z 8901 CLASS
15粉尘COTTON LINTERS 棉花纤维铁粉（赤）氧化铁 Carbon Black炭黑Ashrae test dust with carbon
black 試験用粉体１の7種, 8種, 11種JIS粉尘是依据JIS（Japanese Industrial
Standard，即日本工业标准）生产的试验粉尘，常被用于一些日系产品的检测。本公司可为广大国内用户提供日本进口的下述检测杂质，包括JIS Z
8901的试验粉尘和玻璃珠产品；请在与我们的时候描述清楚您需要的是下面哪种产品Quartz sand Talc Fly ash KANTO
（Japanese） loam Carbon black Calcium- carbonate （heavy） Glass beads GBL type
Glass beads GBM type White fused alu mina JIS Z8901 1 种（硅砂） JIS Z8901 3 种（硅砂）JIS
Z8901 4 种（滑石粉）JIS Z8901 7 种（关东粉）JIS Z8901 8
种（关东粉）铁粉0-5微米Fe3O4铁粉（赤）0-5微米Fe2O3
铁粉（赤）5-10微米Fe2O3 棉花纤维COTTON LINTERS
美国亚利桑那试验粉尘#IEC 60312试验粉尘#ISO 12103试验粉尘 4006306773;;60496773;,王，韩国ITC沙尘试验箱
我司的美国PTI试验粉尘应用在包括滤清器行业，电子行业等；德国DMT试验粉尘对于房屋通风系统过滤器应用比较广泛；而日本JIS试验粉尘的也应用在滤清器行业和电子行业；下表列出了来自美国PTI公司的常用的滤清器行业检测标准；
自从我司2007年七月取得美国PTI公司ZG*权后。我们发现大部分客户并非来自滤清器行业，如果您已购买过我司的各种试验杂质，并愿意共享你们的标准，非常欢迎您来信，提供您使用的标准号，标准名称，对应的试验杂质以及简单的注释。我们将不断地扩充下表；
共享是件很棒的事！
Filtration Standards, | Contaminants | Comments & |
| ANSI B93.31: Multipass Method for Evaluating the Filtration Performance of a Fine Hydraulic Fluid Power Element | ISO 12103-1, A2 Fine Test Dust （AC Fine Test Dust per standard is obsolete） | B93.31: Hydraulic Filter Multipass Method is cancelled. ISO 16889 has replaced the ANSI B93.31 & NFPA T3.10.8.8 documents |
| ISO 4020: Road Vehicles - Fuel Filters for Diesel Engines | ISO 12103-2, M1 and M2 Aluminum Oxide Test Dusts | An Organic Contaminant is also required, see 4020 standard for details. |
| ISO 4548-4: Initial Particle Retention Efficiency, Life & Cumulative Efficiency （gravimetric method） | ISO 12103-1,A2 Fine Test Dust ISO 12103-2, M2, M3, M4 and M5 Aluminum Oxide Test Dust | Life & Cumulative Efficiency uses A2 Fine Test Dust Initial Particle Retention uses M series of Aluminum Oxide Test Dust |
| ISO 4548-12: Filtration Efficiency using Particle Counting, & Contaminant Retention Capacity | ISO 12103-1, A3 Medium Test Dust | SAE J 1858 Oil Filter Multipass Method is cancelled. ISO 4548-12 has been adopted by SAE |
| ISO 4572: Hydraulic Fluid Power- Filters - Multipass Method | ISO 12103-1, A2 Fine Test Dust （AC Fine Test Dust per std. is obsolete） | SAE J 726 Air Cleaner Test Code is cancelled. ISO 5011 has been adopted by SAE |
| ISO/TS 11155-1: Road Vehicles - Air Filters for Passenger Compartments Part 1: Test for Particulate Filtration | ISO 12103-1, A2 Fine Test Dust | SAE J 1669-1: Cabin Particulate cancelled. ISO/TS 11155-1 has been adopted by SAE |
| ISO/TS 13353: Diesel Fuel & Petrol Filters for Internal Combustion Engines - Initial Efficiency by Particle Counting | ISO 12103-1, A3 Medium Test Dust | ISO/TS 13353 is cancelled & withdrawn. ISO 19438 has replaced 13353 |
| ISO 16889: Hydraulic Fluid Power Filters - Multipass Method for Evaluating Filtration Performance of a Filter Element. | ISO 12103-1, A3 Medium Test Dust | ISO 16889 has replaced 4572 Hydraulic Filter Multipass Test Method |
| ISO 19438: Diesel Fuel & Petrol Filters for Internal Combustion Engines - Filtration Efficiency using Particle Counting & Contaminant Retention Capacity | ISO 12103-1, A3 Medium Test Dust | ISO 19438 has replaced 13353 Fuel Filter Initial Efficiency |
| ISO/CD19713: Inlet Air Cleaning Equipment for Internal Combustion Engines & Compressors -Fractional Efficiency Testing | ISO 12103-1, A2 Fine Test Dust and A4 Coarse Test Dust | This Standard is under development by ISO/TC22/SC7/WG3 Air & Oil Filters |
| JIS D1608: Fuel Filter Test Method for Automotive Gasoline Engines | JIS Z 8901, Class 8 （fine） Test Dust | ISO 12103-1, A2 Fine Test Dust may be substituted if listed in test report and/or with customer agreement |
| JIS D1611: Automotive Parts - Test Methods of Lubricating Oil Filters | SOFTC-2A | Gravimetric Test Method |
| JIS D1617: Automotive Parts - Fuel Filters for Diesel Engines Test Methods | An Organic Contaminant is also required, see D1617 standard for detail. ISO 12103-2 Aluminum Oxide Test Dusts JIS Z 8901 Class 8 （fine） Test Dust | ISO 12103-1, A2 Fine Test Dust may be substituted for JIS Z 8901 Class 8 Test Dust if listed in test report and/or with customer agreement |
| NFPA T3.10.8.8: Hydraulic Fluid Power-Filters - Multipass Method for Evaluating Filtration Performance | ISO 12103-1, A2 Fine Test Dust （AC Fine Test Dust per standard is obsolete） | T3.10.8.8 Hydraulic Filter Multipass Method is cancelled. ISO 16889 has replaced the NFPA & ANSI B93.31 documents |
| SAE J 726: Air Cleaner Test Code | ISO 12103-1, A2 Fine Test Dust and A4 Coarse Test Dust | SAE J 726 Air Cleaner Test Code is cancelled. ISO 5011 has been adopted by SAE |
| SAE HS- 806: Oil Filter Test Procedure Section 6: Filter Capacity & Contaminant Removal Characteristics of Full-Flow Oil Filters | ISO 12103-1, A2 Fine Test Dust SOFTC 2A | Gravimetric Test Method for Overall Efficiency & Capacity |
| SAE HS- 806: Oil Filter Test Procedure Section 7: Single Pass Particle Retention Capability Test | Broad Range within 29-470 μm of glass beads Narrow Range in 10 μm fractions of glass beads Natural ISO 12103-1, A4 Coarse Test Dust in full range or fractions thereof | Gravimetric Test Method for Single Pass Efficiency |
| SAE J 905: Fuel Filter Test Methods | ISO 12103-1, A2 Fine Test Dust | Gravimetric Test Method for Efficiency & Capacity |
| SAE J 1669-1: Passenger Compartment Air Filter Test Code - Particulate Filtration | ISO 12103-1, A2 Fine Test Dust | SAE J 1669-1 is cancelled. ISO 11155-1 has been adopted by SAE |
| SAE J 1858: Full-Flow Lubricating Oil Filters Multipass Method for Evaluating Filtration Performance | ISO 12103-1, A3 Medium Test Dust | SAE J 1858 is cancelled. ISO 4548-12 has been adopted by SAE |
| SAE J 1985: Fuel Filters - Initial Single Pass Efficiency Test Method | ISO 12103-1, A2 Fine Test Dust | Particle Counting Fuel Filter Test Method- Fractional Efficiency |
美国亚利桑那试验粉尘#IEC 60312试验粉尘#ISO 12103试验粉尘 4006306773;;60496773;,王，韩国ITC沙尘试验箱
| Q2、PTI公司的ISO等级的试验粉尘的密度（单位体积重量）大概是多少？ 1、 ISO 12103-1 A1 Ultrafine – 500 kg/m3 2、 ISO 12103-1 A2 Fine – 900 kg/m3 3、 ISO 12103-1 A3 Medium – 1025 kg/m3 4、 ISO 12103-1 A4 Coarse – 1200 kg/m3 |
美国亚利桑那试验粉尘#IEC 60312试验粉尘#ISO 12103试验粉尘 4006306773;;60496773;,王，韩国ITC沙尘试验箱
| Q3、请问 SAE Fine Test dust 是否等同于 ISO 12103-1 A2 Fine Test Dust? SAE J726 试验粉尘和 ISO 12103-1 A2 Fine试验粉尘之间有何区别? ISO 12103-1, A2 细试验粉尘与1993年之前PTI公司生产的 SAE Fine Test Dust 是相同的。只是由于鉴于依据 ISO 12103-1 标准的测量仪器的升级，其报告的颗粒尺寸要略小一点点。 SAE J726 标准已在2002年作为并由 ISO 5011 取代，ISO 5011 指定使用满足 ISO 12103-1 标准的试验粉尘。关于这个问题的详细信息，点击此处访问试验粉尘的历史。 | |||||||||||||||||||||||
美国亚利桑那试验粉尘#IEC 60312试验粉尘#ISO 12103试验粉尘 4006306773;;60496773;,王，韩国ITC沙尘试验箱
美国亚利桑那试验粉尘#IEC 60312试验粉尘#ISO 12103试验粉尘 4006306773;;60496773;,王，韩国ITC沙尘试验箱
|
美国亚利桑那试验粉尘#IEC 60312试验粉尘#ISO 12103试验粉尘 4006306773;;60496773;,王，韩国ITC沙尘试验箱
| 美国亚利桑那试验粉尘#IEC 60312试验粉尘#ISO 12103试验粉尘 4006306773;;60496773;,王，韩国ITC沙尘试验箱 |
| 更多内容正不断收集整理中……美国亚利桑那试验粉尘#IEC 60312试验粉尘#ISO 12103试验粉尘 4006306773;;60496773;,王，韩国ITC沙尘试验箱 |
JIS Z8901 JW-1049 贵阳德国KSL试验粉尘供应
真空吸尘器专用测试粉尘#20筛网德国DMT粉尘
德国走粉尘蝶阀 过粉末阀门 卸料蝶阀 德国VATTEN
XO-RM4 重庆、成都、贵阳便携式粉尘检测仪器
德国DMT粉尘,DMT 7.2.2.3测试粉尘
德国DMT粉尘,DMT 7.2.2.2试验粉尘
德国DMT粉尘,IEC 60312 7.2.2.1粉尘
德国DMT粉尘Terostat IX粉尘
德国KSL粉尘DIN 40050试验粉尘
德国KSL粉尘SAE J726 grob进口粉尘
德国KSL粉尘SAE J726 fein试验粉尘
德国KSL粉尘test dust china medium中级粉尘
本产品信息由（上海巨为仪器设备有限公司）为您提供，内容包括（JIS Z8901 JW-1049 贵阳德国KSL试验粉尘供应）的品牌、型号、技术参数、详细介绍等；如果您想了解更多关于（JIS Z8901 JW-1049 贵阳德国KSL试验粉尘供应）的信息，请直接联系供应商，给供应商留言。若当前页面内容侵犯到您的权益，请及时告知我们，我们将马上修改或删除。
关注微信公众号
微信小程序
沪公网安备 31011502008050号
