热变形维卡软化点温度测定仪热变形温度测定仪维卡软化点温度检测仪_详细资料

产品信息

规格：国标

XRW-300A热变形、维卡软化点温度测定仪


一产品介绍;
   热变形、维卡软化点温度测定仪主要用于非金属材料（如塑料、橡胶、尼龙、电绝缘材料等）的热变形及维卡软化点温度的测定。具有质量稳定，操作简单的特点，是化工企业、科研单位、大专院校等行业的理想测试工具。

二特点:
1 试样架为一体式结构，膨胀系数小，实验数据真实准确。
2 采用成型单元控制器对升温速率、温度上限、温度显示进行控制。
3 操作简单、使用方便、性能稳定。
4 显示方式；数字显示
三符合标准；
本仪器符合ISO75，ISO306，GB1633-2000，GB1634-2004   GB8802-2001 等标准
四主要技术参数
1 温度控制范围：室温～300℃；
2 升温速率：120±10℃／h（12℃±１℃／６min ）
            5０± 5℃／h（5℃±0.5℃／６min）
3 变形测量范围：变形测量范围为0～10mm，变形分辨力为0.001mm，变形测量准确度0.005mm
4 试样架数量：3个；
5 试样跨距：64±1 mm 100±1 mm
6 加热功率：3kw；
7 冷却方式：自然冷却；水循环冷却
8 加热介质：甲基硅油（粘度200厘斯以下,闪点300℃以上）；
9 主机电源为交流三相五线380v±10%，50Hz，5kw。具有水冷却循环系统。
10 维卡负荷杆装有负荷板，固定于刚性金属架上，能在垂直方向自由移动。负载杆和金属架构件应具有相同的膨胀系数。
11 压针头为硬质钢制成，长3mm，横截面积为1.000±0.015mm2的圆柱体，压针头下表面应平整，垂直于负载杆的轴线，无毛刺。
12 外形尺寸为645mmx670mmx1450mm。
  XRW-300B热变形、维卡软化点温度测定仪

一产品介绍;
   热变形、维卡软化点温度测定仪主要用于非金属材料（如塑料、橡胶、尼龙、电绝缘材料等）的热变形及维卡软化点温度的测定。具有质量稳定，操作简单的特点，是化工企业、科研单位、大专院校等行业的理想测试工具。
二特点:
1 试样架为一体式结构，膨胀系数小，实验数据真实准确。
2 采用成型单元控制器对升温速率、温度上限、温度显示进行控制。
3 操作简单、使用方便、性能稳定。
4 显示方式；计算机控制
三符合标准；
本仪器符合ISO75，ISO306，GB1633-2000，GB1634-2004   GB8802-2001 等标准
四主要技术参数
1 温度控制范围：室温～300℃；
2 升温速率：120±10℃／h（12℃±１℃／６min ）
            5０± 5℃／h（5℃±0.5℃／６min）
3 变形测量范围：变形测量范围为0～10.000mm，变形分辨力为0.001mm，变形测量准确度0.005mm
4 试样架数量：3个；
5 试样跨距：64±1 mm 100±1 mm
6 加热功率：4kw；
7 冷却方式：自然冷却，水循环冷却
8 加热介质：甲基硅油（粘度200厘斯以下,闪点300℃以上）；
9 主机电源为交流三相五线380v±10%，50Hz，5kw。具有水冷却循环系统。
10 维卡负荷杆装有负荷板，固定于刚性金属架上，能在垂直方向自由移动。负载杆和金属架构件应具有相同的膨胀系数。
11 压针头为硬质钢制成，长3mm，横截面积为1.000±0.015mm2的圆柱体，压针头下表面应平整，垂直于负载杆的轴线，无毛刺。
12 外形尺寸为645mmx670mmx1450mm。
实现的功能:
    1、    实时显示试验温度和温度—变形曲线。
试验过程中，通过输入试样的尺寸，可自动计算出试验所须的负荷质量。
上线温度、变形量在使用范围内任意设定。
误差通过软件自动修正。
试验曲线颜色任意设定，可以实时显示和隐藏，并且曲线宽度粗细任意转换。
试验完成或达到上限温度时，具有报警功能，并自动停止加热。
试验完成后，打印试验曲线和试验报告。查询历次试验的历史纪录，并能重绘历次试验的试验曲线。
用户可对自己的使用软件进行三级密码保护。
必须使用正板软件进行安装，否则系统无法运行。

Xrw-300a thermal deformation, vesica softening point temperature tester

Product introduction;
Thermal deformation and vesica softening point temperature meter are mainly used for the determination of thermal deformation of non-metallic materials (such as plastics, rubber, nylon, electrical insulating materials, etc.) and the temperature of the wika softening point.
With the characteristics of stable quality and simple operation, it is an ideal testing tool for chemical enterprises, scientific research units and colleges and universities.

Two features:
1. The sample frame is a one-piece structure with small expansion coefficient, and the experimental data is accurate and accurate.
The heating rate, temperature cap and temperature display are controlled by the forming element controller.
3 simple operation, convenient use and stable performance.
4 display mode;
Digital display
Three meets the standard;
The instrument meets the standard of ISO75, ISO306, gb1633-2000, gb1634-2004 gb8802-2001
Main technical parameters
1 scope of temperature control: at room temperature to 300 ℃;
Heating rate: 120 plus or minus 10 ℃ / h (12 ℃ + / - 1 ℃ / 6 min)
50 + / - 5 ℃ / h (0.5 ℃ / 5 ℃ + 6 min)
3. Deformation measurement range: the deformation measurement range is 0 ~ 10mm, the deformation resolution is 0.001mm and the deformation measurement accuracy is 0.005mm
4 sample frame number: 3;
Sample span: 64 + 1 mm 100 mm 100 mm
Maximum heating power: 3kw;
7 cooling mode: natural cooling;
Water circulation cooling
8 the heating medium: methyl silicone oil (below 200 CST viscosity, flash point above 300 ℃).
The host power supply is ac three-phase five-wire 380v plus or minus 10%, 50Hz, 5kw.
It has water cooling but circulatory system.
The 10 vicar load bar is equipped with a load plate, fixed on a rigid metal frame, and can move freely in the vertical direction.
The load bar and metal structure should have the same expansion coefficient.
The pressure needle is made of hard steel, 3mm long, and the cross sectional area is 1.000 + 0.015 mm2, the surface of the pressure needle should be flat, perpendicular to the axis of the load rod, without burr.
The size of 12 is 645mmx670mmx1450mm.
Xrw-300b thermal deformation, vesica softening point temperature tester

Product introduction;
Thermal deformation and vesica softening point temperature meter are mainly used for the determination of thermal deformation of non-metallic materials (such as plastics, rubber, nylon, electrical insulating materials, etc.) and the temperature of the wika softening point.
With the characteristics of stable quality and simple operation, it is an ideal testing tool for chemical enterprises, scientific research units and colleges and universities.
Two features:
1. The sample frame is a one-piece structure with small expansion coefficient, and the experimental data is accurate and accurate.
The heating rate, temperature cap and temperature display are controlled by the forming element controller.
3 simple operation, convenient use and stable performance.
4 display mode;
Computer control
Three meets the standard;
The instrument meets the standard of ISO75, ISO306, gb1633-2000, gb1634-2004 gb8802-2001
Main technical parameters
1 scope of temperature control: at room temperature to 300 ℃;
Heating rate: 120 plus or minus 10 ℃ / h (12 ℃ + / - 1 ℃ / 6 min)
50 + / - 5 ℃ / h (0.5 ℃ / 5 ℃ + 6 min)
3. Deformation measurement range: the deformation measurement range is 0 ~ 10.000 mm, the deformation resolution is 0.001mm and the deformation measurement accuracy is 0.005mm
4 sample frame number: 3;
Sample span: 64 + 1 mm 100 mm 100 mm
Maximum heating power: 4kw;
7 cooling mode: natural cooling, water circulation cooling
8 the heating medium: methyl silicone oil (below 200 CST viscosity, flash point above 300 ℃).
The host power supply is ac three-phase five-wire 380v plus or minus 10%, 50Hz, 5kw.
It has water cooling but circulatory system.
The 10 vicar load bar is equipped with a load plate, fixed on a rigid metal frame, and can move freely in the vertical direction.
The load bar and metal structure should have the same expansion coefficient.
The pressure needle is made of hard steel, 3mm long, and the cross sectional area is 1.000 + 0.015 mm2, the surface of the pressure needle should be flat, perpendicular to the axis of the load rod, without burr.
The size of 12 is 645mmx670mmx1450mm.
Implementation functions:
1. Real-time display test temperature and temperature - deformation curve.
During the test, the load quality of the test is automatically calculated by entering the sample size.
The on-line temperature and deformation are set arbitrarily within the range of use.
The error is automatically corrected by software.
The test curve color is arbitrary and can be displayed and hidden in real time, and the curve width is arbitrary and arbitrary.
When the test completes or reaches the upper limit temperature, it has alarm function and automatically stops heating.
After completion of test, print test curve and test report.
Check the historical records of the previous experiments and can redraw the test curves of the previous experiments.
Users can make use of their own software for three levels of password protection.
You must use positive board software to install, otherwise the system will not work.

您可能感兴趣的产品

热变形维卡软化点温度测定仪 热变形温度测定仪 维卡软化点温度检测仪

产品信息

热变形维卡软化点温度测定仪热变形温度测定仪维卡软化点温度检测仪