飞秒脉冲重复频率锁定-光锁相环_详细资料

产品信息

飞秒脉冲重复频率锁定-光锁相环技术服务人员：谷工(Givin) &nbsp

飞秒脉冲重复频率锁定-光锁相环
技术服务人员：谷工(Givin)
电话：185 1625 1863
邮箱：zonghao-gu@auniontech.com
飞秒脉冲重频锁定器-光锁相环可以高精度地检测光脉冲序列与微波信号零交叉之间的时间延迟。它生成一个基带信号，该信号与两个输入之间的时间误差成正比，从而可以在锁相环配置中用于将激光与微波源紧密同步，反之亦然。由于其采用平衡光学探测的检测方案，使得飞秒脉冲重频锁定器对光源和微波源的幅值波动都具有免疫能力，大大YZ了光检测过程中的AM-PM转换噪声。
应用
超快激光重频与微波信号的同步锁定
微波信号与超快激光重频之间的同步锁定
微波源与稳定光纤链路输出的同步
由超快光学振荡器产生超低噪声微波信号
与束到达监测器(BAM)一起使用时，超快激光与加速器中电子束的同步

规格

Parameter
Value
Unit
Comment
Detector sensitivity
> 0.05
mV / fs
At the detector output (not amplified)
Detector resolution
< 0.5
fs
Integrated detector noise floor within 10 kHz bandwidth
Control system
included

Available in Epics, Tango…
Auto lock
included

Dimensions

Rack mountable, 19 inch width, 5HU
Weight
10-20
kg
Depending on options

RF input power
>15
dBm
Up to 10 GHz. BOMPD tailored to frequency of interest
Optical input wavelength
800 ± 30
1550 ± 40
nm
Operating at pulsed mode
Optical input power
> 50*
> 20**
mW
* Required average power for 800nm version
** Required average power for 1550nm version
Optical input type
PM Fiber

FC or SC connector
Pulse repetition rate
< 10
GHz
BOMPD is tailored for the repetition rate of interest
RF Generation Option for BOMPD
VCO
Included

Customizable upon request
Integrated feedback
Included

Optimized PID parameters
Timing Jitter
< 30
fs RMS
Within 35 μHz - 1 MHz bandwidth; relative to the master oscillator
RF output frequency
< 10
GHz
Can be tailored for the frequency of interest
Locking bandwidth
> 10
kHz
Between the optical master and RF slave oscillator
RF output power
> 10
dBm
50 Ω impedance
RF power stability
< 0.1
%

Low Noise Option for BOMPD
VCO
Included

Timing Jitter
< 5
fs RMS
Within 35 μHz - 1 MHz bandwidth; relative to the master oscillator

您可能感兴趣的产品

Parameter	Value	Unit	Comment
Detector sensitivity	> 0.05	mV / fs	At the detector output (not amplified)
Detector resolution	< 0.5	fs	Integrated detector noise floor within 10 kHz bandwidth
Control system	included		Available in Epics, Tango…
Auto lock	included
Dimensions			Rack mountable, 19 inch width, 5HU
Weight	10-20	kg	Depending on options

RF input power	>15	dBm	Up to 10 GHz. BOMPD tailored to frequency of interest
Optical input wavelength	800 ± 30 1550 ± 40	nm	Operating at pulsed mode
Optical input power	> 50* > 20**	mW	* Required average power for 800nm version ** Required average power for 1550nm version
Optical input type	PM Fiber		FC or SC connector
Pulse repetition rate	< 10	GHz	BOMPD is tailored for the repetition rate of interest
RF Generation Option for BOMPD
VCO	Included		Customizable upon request
Integrated feedback	Included		Optimized PID parameters
Timing Jitter	< 30	fs RMS	Within 35 μHz - 1 MHz bandwidth; relative to the master oscillator
RF output frequency	< 10	GHz	Can be tailored for the frequency of interest
Locking bandwidth	> 10	kHz	Between the optical master and RF slave oscillator
RF output power	> 10	dBm	50 Ω impedance
RF power stability	< 0.1	%
Low Noise Option for BOMPD
VCO	Included
Timing Jitter	< 5	fs RMS	Within 35 μHz - 1 MHz bandwidth; relative to the master oscillator