以色列OPHIR 高功率热电堆功率计探头100K-W以色列OPHIR 高功率热电堆功率计探头100K-W特点:
功率水冷高达100kW的φ200mm光圈
产品参数:
1.测量型式 Water cooled beam absorber chamber with deflecting cone.
Separate power measuring unit monitoring input and output cooling water flow and temperature
2.光谱范围μm 0.8 –1.1μm
3.光圈mm φ200
4.功率范围为校准阅读 10kW – 100kW
5.电源噪声水平 ±20W with stable water temperature
6.反向散射功率 Less than 1%
7.限制电波 Designed for near Gaussian beam. Beam to be focused with 500 -1000mm FL lens and meter placed so that the 1/e2 beam diameter on reflecting cone is φ100mm in diameter (see sketch above)
8.Beam Centering Requirements Beam to be centered on deflecting cone ±5mm and parallel ±2degrees
9.响应时间 40s at flow rate 50 liter/min and 60s at flow rate 20 liter/min
10.功率精度 +/-% 5
11.冷却需求 Water flow rate, 50 liters/min at max power. Inlet temperature 15-20degC. Inlet water
temperature rate of change <0.3degC/min at full power, proportionately less at lower power
12.全功率Z小水流速度 25 liter/min
13.近光吸收器水压下降值 3 bar at 50 liter/min flow rate 14.水连接器 Up to 4 meters in each direction of 1” OD 13/16” ID flexible nylon tubing
15.输出 1. Cable terminated in DB15 Ophir smart plug reading power
2. Cable terminated in DB9 plug with RS232 ASCII output reading power, flow rate and temperature on PC. Cable lengths 10 meters
16.规格 See drawing up
17.重量 Beam Absorber 50kg. Power measuring unit 10kg
18.零件编号 Consult Ophir representative