瑞典FRIBORG扭矩测试仪5500批发价格

扭矩测试仪– 型号5500

扭矩测试仪/一个部分设计成插头形状。

深圳市奥德赛创精密仪器有限公司的诚信、实力和产品质量获得业界的认可。

欢迎各界朋友莅临参观、指导和业务洽谈。请联系销售总监：苏曼 

IEC 60950-1 章节4.3.6解释了一台上述提到的设备作用于一个插座上时怎样控制扭矩。

标准图11中介绍了这台设备。按定义来说这是一台平衡测试设备。

瑞典FRIBORG扭矩测试仪5500批发价格技术参数

·                                 设备依据图11设计而成

·                                 测量范围0 - 0,25 Nm 或0 - 0,50 Nm

·                                 设备配有一个测重砝码用于调零

·                                 通过线性mm刻度地移动砝码来测量插头产生的扭矩

·                                 两个砝码带托盘的重量是102g(1N)或204g(2N)

·                                 共有三种类型的适配器: 分别包括英式，美式和欧式

如何计量

·                                 在没有挂砝码和砝码托盘的条件下控制零平衡

·                                 选择正确的适配器

·                                 将试样插入试验设备的插座

·                                 使用102g的砝码来测量范围为0-0,25 Nm的扭矩

·                                 通过移动样品托盘找到扭矩平衡值时候的位置

标准：IEC60950-1 章节4.3.6

重量：约5 kg尺寸：约600x400x400 mm (LxWxH)

Torque Tester - Model 5500

Torque Tester/one part designed as a plug. 

In the IEC 60950-1 Clause 4.3.6 is explained how to control the maximum torque that a device as mentioned above generates on a socket outlet. 
Figure 11 of this standard describes such test equipment. In principle this equipment is balance test equipment.

Technical specification

·                                 The equipment is designed according to Fig. 11

·                                 Scale ranges are 0 - 0,25 Nm or 0 - 0,50 Nm

·                                 The equipment has a counter weight for setting zero balance

·                                 By moving the weights on a linear mm scale the torque that the plug is generating is measured

·                                 The two weights are 102 gram (1 N) or 204 gram (2 N) together with the weight holder

·                                 There are 3 types of adapters: for resp. UK, USA ａnd Europe included

Instruction how to carry out the measurement

·                                 Control the zero balance without: weight ａnd weight holder hanging on

·                                 Choose the correct adapter

·                                 Plug in the sample into the test equipment outlet

·                                 Use weight for 102 gram for measuring range 0-0,25 Nm

·                                 By moving the sample holder to correct position you find balance value of the torque