符合标准:GB/ T 3960-1983 塑料滑动摩擦磨损试验方法GB/T 9141.8-1999 柔性石墨板材滑动摩擦系数测试方法适用于塑料制品、橡胶制品、石墨板材或其他复合材料的滑动摩擦,磨损性能测试,也可对试验中试样的磨擦力、磨擦系数和磨损量进行测定。
塑料滑动摩擦磨损试验机-微机
产品名称:塑料滑动摩擦磨损试验机
产品型号:M-200
控制方式:微机控制
一、适用范围及功能
符合标准:GB/ T 3960-1983 塑料滑动摩擦磨损试验方法
GB/T 9141.8-1999 柔性石墨板材滑动摩擦系数测试方法
适用于塑料制品、橡胶制品、石墨板材或其他复合材料的滑动摩擦,磨损性能测试,也可对试验中试样的磨擦力、磨擦系数和磨损量进行测定。
本仪器融合了当前的智能电路系统进行控制,并结合老式M-200摩擦磨损试验机的功能进行升级改造而成,本仪器具有测控精度高,操作便捷等优势,是科研院所、质检机构、实验室研究的试验设备。
M-200型摩擦磨损试验机主要由试验主机及智能控制系统两大部分构成,通过微机控制系统进行操作试验,在试验过程中同时可以显示数值、扭矩、时间曲线,并可以随意设定试验次数,显示当前试验数值,设定时间及当前试验时间等多种功能,随机配备彩色打印机,可以打印出带有曲线、表格数据等标准要求的试验报告。
二、功能特点:
1、试样尺寸: 30mm×7mm×6mm
2、转动速度: 0-200转/分 (可调)
3、负 荷: 196N ± 0.1%(可增至392N)
4、摩擦环尺寸:¢40×10mm ,倒角0.5×45°,外圆表面与内圆同心度偏差小于0.01
5、摩擦环材质:45号钢,淬火,热处理HRC40-45,外圆表面光洁度▼8
6、摩擦力矩: 0--4N·m
7、砝码重量:4KG砝码一件,1KG砝码4件,可实现重量叠加功能。
三、精度:
1、速度精度:1%
2、负荷精度:0.5%
3、摩擦力矩精度:1%
4、计数器精度:1S
5、传感器测量精度:1% FS
四、软件操作截图:
试验主界面:
参数设置:
打印报告:
五、主要配置:
名 称 数 量 备 注
试验主机 一台
高精度扭矩传感器 一只
计算机数据采集卡 一块
计算机控制系统 一套
4KG砝码 1件
1KG砝码 4件
标准摩擦环 2件
使用说明书 一份
产品合格证 一份
产品装箱单 一份
计算机 一台
彩色喷墨打印机 一台
Friction and wear testing machine with microcomputer plastic sliding
Product Name: plastic slide friction wear testing machine
Product type: M-200
Control mode: microcomputer control
One, the scope and function
Standard Test Method for friction and wear of GB/: T 3960-1983 plastic sliding
Test method GB/T 9141.8-1999 flexible graphite sheet sliding friction coefficient
Sliding friction is suitable for plastic products, rubber products, graphite sheet or other composite materials, wear performance test, also can be the friction force, the test sample in the friction coefficient and wear volume determination.
The instrument combines the latest intelligent circuit control system, combined with the old M-200 wear testing machine, friction and function upgrade, the instrument has high control accuracy, convenient operation and other advantages, is the study of test equipment, quality inspection institutions, the preferred the laboratory research institute.
Friction and wear testing machine is mainly composed of the host and the intelligent control system consists of two parts of M-200, operation test by microcomputer control system, in the process of test and can display the numerical, torque, time curve, and can set the test number freely, display the current test data, a variety of functions the setting time and the test time, random equipped with color printer, you can print the test report with a curve, form data standard.
Two, function characteristics:
1, the sample size: 30mm x 7mm x 6mm
2, rotation speed: 0-200 RPM (adjustable)
3, the load: 196N ± 0.1% (to 392N)
4, the friction ring size: 40 x 10mm -, chamfer 0.5 * 45 degrees, surface of the outer circle and inner circle concentricity deviation is less than 0.01
5, the friction ring material: 45 steel, quenching, heat treatment of HRC40-45, the outer circle surface finish ▼ 8
6, the friction moment: 0--4N M
7, weight: 4KG weight a, 1KG weight 4, weight function can be realized.
Three, accuracy:
1, speed accuracy: 1%
2, load precision: 0.5%
3, the friction torque accuracy: 1%
4, the counter accuracy: 1S
The 5, sensor measurement accuracy: 1% FS
Four, the software operation:
Testing main interface:
Parameter settings:
Print report:
Five, the main configuration:
Name number note
Test a host
A high precision torque sensor
A computer data acquisition card
A set of computer control system
4KG weight 1
1KG weight 4
Standard friction ring 2
Using a manual