|
INPUT SPECIFICATIONS | |
˙Input voltage:
| 90 to 264 VAC |
˙Input frequency: | 115V: 60Hz
230V: 50Hz |
˙Inrush current: | 50Amps-peak/115Vac
80Amps-peak/230Vac |
˙Input current: | mps/115Vac
2.mps/230Vac |
OUTPUT SPECIFICATIONS | |
˙Over voltage protection: | +5V output: 5.85V min, 6.82V max..;
+3.3V output: 3.5V min., 4.5V max; |
˙Overload protection: | +5V: 40Amps ;
+3.3V: 50Amps;
+12V: 20Amps; |
˙Short circuit protection: | The short circuit on any DC output shall not cause any damage to the power supply, including the primary fuse. |
GENERAL SPECIFICATIONS | |
˙Hold-up time: | 20ms at 115Vac/60Hz,
20ms at 230Vac/50Hz. |
˙Efficiency: | 68% min. 115/230Vac at full load |
˙MTBF: | 100,000 hours at full load at 25℃ |
˙Power good signal: | Turn on delay time 100ms to 500 ms |
ENVIRONMENTAL SPECIFICATIONS
˙Operating temperature: | 0℃ to +50℃ |
˙Storage temperature: | -20℃ to +80℃ |
˙Relative humidity: | 5% to 95% RH non-condensing |
|
FSP250-50PLB（1U） 全汉电源，工控机电源
研华工控机电源250W 研华工控机电源250W，PS-250ATX-ZE
工控机主板维修 西门子PCU50工控机电源维修
西门子工控机专业维修 西门子工控机电源坏维修
PC677B 西门子工控机工控机电源坏维修
各种电源机箱盒小电气箱工控机顶盒喷漆打样加工
北京档案馆ZY控制台防雷及UPS电源管理 级防雷装置 工业工控机
工控机 西门子工控电源维修
S-600W-12V50A S-600W-12V50A单组输出开关电源工控机械电源
开不了机 西门子PCU50工控机不启动电源坏维修
系统死机 西门子工控机电源坏维修
