交流配电 交流侧防雷:In=20kA,Im=40kA 1 路空开输入:1×32A/2P 空开 1 路插座输出:10A 插座(输出不超过 8A) 1 路空开输出:10A,保护加热器(仅 EPC4860/1800-FB2)和插座
加热器(仅 EPC4860/1800-FB2):PTC 加热器,315W
直流配电 直流侧防雷:In=10kA 1 路电池输入空开:63A/1P 6 路电池下电支路:2×32A/1P,2×16A/1P,2×10A/1P
柜内空间 安装铅酸电池 1 个电池组(电压:48V,容量:40Ah),可选
安装 19 英寸设备 4U(和电池空间二选一)
工作温度
-10℃~+45℃
储存温度 -40℃~+70℃ 相对湿度 5%RH~100%RH 海拔高度 ≤2000m(超过需降额使用) 污染等级 Ⅲ
其它 没有导电尘埃和腐蚀性气体,没有爆炸危险
输入制式 TN 系统,单相三线 额定输入相电压 220Vac 输入电压范围 85Vac~300Vac 输入交流电压频率 45Hz~65Hz 输入电流 ≤30A(含 10A 用户插座) 功率因数 ≥0.99
过电压类别 Ⅲ
输出直流电压范围 43.2Vdc~57.6Vdc 输出直流电压 54.0Vdc 输出直流电流 0~60A(输出电压为 54V) 当机柜内安装电池时:用户负载输出为 0~50A,电池充电电流为 0~10A 当机柜内安装设备时:当设备发热量达到 200W 时,用户负载输出 40A
效率 ≥90%
参数类别 参数名称 描述 机械参数 尺寸(宽×深×高) 机柜 610mm×290mm×700mm(不含底座) 柜内空间 安装铅酸电池 440mm×180mm×430mm 安装 19 英寸设备 485mm×180mm×365mm 重量(kg) 机柜 ≤30(不包括电池组、整流模块和安装组件)
整流模块 ≤2.5
工作原理 交流配电部分引入交流电源后输送给整流模块。整流模块将 220V 交流电转换成-48V 直流电,并输出到直流配电部分, 通过各直流输出分路将-48V 直流电输出到各负载。 监控单元具有电池管理、电池下电保护、信号采集和告警等监控功能,并能进行后台通讯。 散热原理 电源系统温控单元采用风机强制散热。 气流从机柜左侧的风口进入,经防尘网后进入机柜内部。进入机柜的风流通过整流模块和用户负载(或电池)后经机柜 右侧壁的风口由风机排出。 在风机不启动的情况下,电源系统采用自然通风散热。
主要特点 整流模块 整流模块功率因数值达 0.99,效率高达 90%以上。 交流输入电压正常工作范围宽至 85Vac~300Vac。当输入电压为 85Vac~175Vac 时,整流模块转为限功率输出。 整流模块采用无损伤热插拔技术,即插即用。更换时间小于 1min。 系统 完善的电池管理。具有电池低电压保护功能,能实现温度补偿、自动调压、无级限流、电池容量计算、在线电池测 试等功能。 可实现远程监控,无人值守。 完善的交、直流侧防雷设计。 完备的故障保护、故障告警功能。 防护指标:防水满足 IP*5 要求,防尘满足 IP4*要求。 应用了整流模块休眠技术,系统具有节能功能。 系统效率 90%以上。
Working principle
The AC power supply is introduced into the AC power distribution part and then transferred to the rectifier module. The rectifier module converts 220V AC to - 48V DC and outputs it to the DC distribution part.
The -48V DC current is output to the loads through each DC output shunt.
The monitoring unit has the functions of battery management, battery down protection, signal acquisition and alarm, and can communicate in the background.
Principle of Heat Dissipation
The temperature control unit of power supply system adopts forced cooling by fan.
The air flow enters the cabinet from the vent on the left side and enters the cabinet after passing through the dust-proof net. The air flow into the cabinet passes through the rectifier module and the user load (or battery) and then through the cabinet.
The tuyere on the right side wall is discharged by the fan.
When the fan does not start, the power supply system uses natural ventilation to dissipate heat.
艾默生EPC4860/1800-FA31室外壁挂通信开关电源48v60A,艾默生EPC4860/1800-FA31