7130/7132/7140/7142 7130/7132/7140/7142耐压绝缘测试仪

品Pai

铧仪

型号

7130/7132/7140/7142

特点：三种测试功能可供选择：ACW, DCW, IR大型128×64 Graphic LCD 显示器单机可与7315接地阻抗测试器连结符合标准19英吋仪器架可同时进行100台的联机测试内建10组程序记忆、每一组3个测试步骤可进行程序记忆步骤的连结测试快速放电功能，可于0.2秒将被测物上的电能放完，确保人员安全防高压触电功能，当人体误触时可立即中断输出开机自我检测功能的测试，可于测试前进行判定各项测试功能是否正常前面板软件输入校正时间与日期的设定，可设定校正时间及预警时间提醒使用者内建PLC Remote遥控界面键盘锁定功能安全锁定功能体积小、重量轻选型

7130 AC Withstand VoltageTester		加入询价
7132 AC Withstand Voltage / Insulation Resistance Tester		加入询价
7140 AC/DC Withstand Voltage Tester		加入询价
7142 AC/DC Withstand Voltage / Insulation Resistance Tester		加入询价

技术参数：

Model 7130 7132 7140 7142 ALL SPECIFICATIONS MODEL 7130 7132 7140 7142 AC WITHSTAND VOLTAGE Output Rating 5KVAC/20mA Range Resolution Accuracy Output Voltage, KVAC 0-5.00 0.01 ±（2% of setting + 5V） Output Frequency 50Hz/60Hz ±100ppm, User Selection Output Waveform Sine Wave ,THD.<2% (Resistive Load), Crest Factor = 1.3 - 1.5 Output Regulation ± (1% of output + 5V), From no load to full load SETTINGS Max-Limit AC Current, mA 0 - 20.00 0.01 ±（2% of setting + 2counts） Min-Limit AC Current, mA 0 - 9.999 0.001 ±（2% of setting + 2counts） Ramp Up Time, second 0.1 - 999.9 0.1 ±（0.1% + 0.05sec） Ramp Down Time, second 0 - 999.9 0.1 Dwell Time, second 0, 0.3 - 999.9 (0=continuous) 0.1 Arc Detection 0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity) DC WITHSTAND VOLTAGE (7140,7142 ONLY) Output Rating 6KVDC/7500µA Output Voltage, KVDC 0 - 6.00 0.01 ±（2% of setting + 5V） Output Ripple <5%（6KV/7500µA at Resistive Load） SETTINGS Max-Limit DC Current, µA 0 - 7500 1 ±（2% of setting + 2counts） Min-Limit DC Current, µA 0 - 999.9 0.1 ±（2% of setting + 2counts） Ramp Up Time, second 0.1 - 999.9 0.1 ±（0.1% + 0.05sec） Ramp Down Time, second 0, 1.0 - 999.9 0.1 Dwell Time, second 0, 0.4 - 999.9 (0=continuous) 0.1 Arc Detection 0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity) Discharge Time ≦ 200 msec INSULATION RESISTANCE (7132,7142 ONLY) Output Rating 1KVDC/9999MΩ Output Voltage, DCV 30 - 1000 10 ±（2% of setting + 5V） SETTINGS Max-Limit Resistance, MΩ 0, 1 - 9999 (0=OFF) 1 ±（2% of setting+2counts）at 500-1000VDC, 1 -1000 MΩ Min-Limit Resistance, MΩ 1 - 9999 1 ±（5% of setting+2counts）at 500-1000VDC, 1000 -9999 MΩ ±（8% of setting+2counts）at 30-500VDC, 1 -1000 MΩ Ramp Up Time, second 0.1 - 999.9 0.1 ±（0.1% + 0.05sec） Ramp Down Time, second 0, 1.0 - 999.9 0.1 Delay Time, second 0, 0.5 - 999.9 (0=continuous) 0.1 MEASUREMENT AC/DC Voltage, KV 0 - 6.00 0.01 ±（1.5% of reading + 1count） DC Voltage, V (IR only) 30 - 1000 1 ±（1.5% of reading + 5V） AC Current, mA 0 - 3.500 0.001 ±（2% of reading + 2counts） 3.00 - 20.00 0.01 DC Current, µA 0 - 350.0 0.1 ±（2% of reading + 2counts） DC Current, mA 0.300 - 3.500 0.001 3.00 - 7.50 0.01 Resistance, , MΩ 1 - 9999 (Auto Range) 0.001 0.01 0.1 1 ±（2% of setting+2counts）at 500-1000VDC, 1 -1000 MΩ ±（5% of setting+2counts）at 500-1000VDC, 1000 -9999 MΩ ±（8% of setting+2counts）at 30-500VDC, 1 -1000 MΩ GENERAL Input Voltage AC 115/230Vac±15%, 50/60Hz ± 5%, Fuse 3.1 PLC Remote Control Input : Test , Reset , Memory1.2.3 , Interlock Output : Pass , Fail , Processing , Reset-Out Interface(Option) RS485 Interface Memory 10 memories, 3 steps/memory Graphic Display 128×64 Graphic LCD Safety Built-in Smart GFI circuit,GFI trip current 450?A max, HV shut down speed: <1mS Key Lock To prevent unauthorized alteration of the test Parameters Calibration Build-in software and external calibrated meters Verification Build-in software driven verification menu to test fault detection circuits Alarm Volume Setting Range: 0-9 ;0=OFF, 1 is softest volume, 9 is loudest volume. Environment 0-40℃, 20-80%RH Dimension/Net Weight 215mm(W)×89mm(H)×370mm(D)/ 10Kg STANDARD ACCESSORIES Power Cord(10A) ×1 Fuses ×2 (Including a spare contained in the fuse holder) Interlock Disable Key(1505) ×1 Hipot Test Lead ,1.5m(1101) ×1 Hipot Return Lead ,1.8m(1102) ×1 *product specifications are subject to change without notice.