本公司今日报道:
仪器资讯聚光HMS-100湿度仪氧变送器
联系人:李女士
电话:17775990825
传真:
邮箱:2226874911@qq.com
商品特性:
1,紧凑型的双活塞杆齿轮齿条式构造,齿合JZ,GX率,輸出扭距匀速运动。
2,铝质发动机缸体,活塞杆及轴承端盖,与同规格型号构造的电动执行机构对比很轻.
3,发动机缸体为挤压成型铝合金型材,经硬塑阳极处理,内表层色泽硬实,抗压强度,强度高.选用低摩擦材料做成的滚动轴承,防止了金属材料间的互相直
接触碰,摩擦阻力低,旋转灵便,使用期长。
4气动执行器与闸阀联接合乎ISO5211规范
5,源孔合乎NAMUR规范。
6气动执行器底端轴装配线孔(合乎ISO5211规范)成双四方形,有利于带方杆的阀线形或46拐角安裝。
7、輸出轴的顶端和顶端的孔合乎NAMUR规范.
8,两边的调节螺丝可调节闸阀的打开视角。
9,同样规格型号的有双功效式,单功效式(弹黄校准)。
10、可依据闸阀必须挑选方位,顺时针方向或反方向转动。
11、依据客户必须安裝继电器、定位仪(开度标示),回信器,各种各样行程开关及手动式实际操作设备。
仪器资讯聚光HMS-100湿度仪氧变送器
Commodity characteristics:
1. Compact double piston rod rack-and-pinion structure, accurate teeth, high efficiency, uniform movement of output torque.
2. The aluminium engine cylinder block, piston rod and bearing end cap are lightly compared with the electric actuator of the same type.
3. The engine cylinder block is extruded aluminium alloy profile, which is processed by hard plastic anode. The inner surface layer is hard, the compressive strength is high. The rolling bearing made of low friction material is selected to prevent the metal material from interacting with each other. Direct touch, low friction resistance, flexible rotation, long service life.
4.Pneumatic actuator and gate valve connection conform to ISO 5211 specification
5. source hole conforms to NAMUR specification.
6. pneumatic actuator bottom axle assembly line holes (in accordance with ISO5211 specification) into double quadrangles, which is conducive to the installation of valve linearity with square rods or 46 corners.
7. The top and top holes of the output shaft conform to NAMUR specification.
8. The adjusting screw on both sides can adjust the opening angle of the gate valve.
9. The same specifications and models have dual-effect type and single-effect type (elastic yellow calibration).
10. According to the gate valve, the orientation must be selected and rotated clockwise or in the opposite direction.
11. According to customers, relays, positioners (opening markers), responders, various stroke switches and manual operating equipment must be installed.