品Pai | 中恒 | 型号 | WQS |
控制类型 | 温度 | 控制模式 | 机械式温度控制器 |
温度范围 | 50----320(℃) | 测温误差 | 0.5(℃) |
输出信号 | 16(mA) | 工作电压 | 250(V) |
产品整理:
型号:WQS系列产品名称: 限温器、保护器
产品关键词: 温控器,温度控制开关,机械式温度控制器,液体膨胀式温度控制器
Thermostat, Thermostat switch,mechanical temperature controller,
Liquid expansion temperature controller
行业及产品类目: Home appliance-Home appliacce parts
产品简要描述及优势:
1、电气性能:16A-250V/AC
2、断开温度:根据用户的要求,温度设计范围(50℃~320℃)、手动复位
3、产品寿命:>6000次
4、主体Z高耐温:150℃
Specification
1.Electrical performance:16A-250V/AC
2.Temperature range: 50℃~320℃,manual reset,
3.Diff: according to the customer requirement.
4. Life: >6,000 time
5.Side of body: 150℃
产品详细描述:
一、原理性能和用途
原理性能:当被控制对象的温度达到设定值时,温控器感温包内的工质产生相应的膨胀的物理现象(工质体积变大),与感温部连通一起的膜盒产生膨胀。通过杠杆原理,带动开关断开动作,达到限温目的。需要人工手动复位。WQS系列液胀式温控器具有限温准确,稳定可靠,泄露自动保护,超载电流大等性能特点。
用途:主要用于电热水器、开水器、电烤箱、电热油炸锅、食品机械等限温用(具有防泄漏自动保护功能)。
Principle of performance andApplication:
When the temperature of the controlled object reaches set value,the
inner workingsubstanceof thermostatsensible bulbproduces a
correspondingexpansion physical phenomenon (theworking substance
volume change), at which connected with the diaphragm of sensible bulb
produceexpansion or contraction.Through the leverage to drive switch on/off action, the purpose is to achieve constant temperature.It is
needed to manually reset.WQS series thermostats havetemperature-limitedaccurate, reliable,automatic protection against leakage, and large
overload current performance characteristics.
用途:主要用于电热水器、开水器、电烤箱、电热油炸锅、食品机械等控温用(具有防泄漏自动保护功能)
Usage: to beapplied to electric water heater, boiler,electronic oven,
frying pan,food machineryfor temperature control use.(With
automatic protection against leakage)
二、注意事项:
1、用户必须根据自己产品的特点,所需控制的温度,提出订货型号和规格。
2、安装时,感温管尽可能整支贴紧被控温表面,以达到控温准确的目的。
3、安装时不可将感温管压变形,以免影响其性能。
4、勿使导电气体或导电物质进入温控器内或污染温控器表面以免影响电气绝缘性能。
5、开关盒是电器陶瓷件,要轻拿轻放,避免破坏。
6、毛细管折弯半径不能小于5mm.
Attentions
1,The client must be based onthe characteristics of their products,what needed the temperature controlling, brought forward the type and specification ordering
goods
2, The whole bulb is next tocontrolled temperature surfacewhile thermostat in
stallation, to achieve accurate temperature control purposes.
3, The installation must not be a bulb pressure deformation, so as not to affect its
performance.4,Don't make electricity gas and electricity material in a thermostat or contaminated thermostat surface to avoid affect the electrical
insulating performance.
5,Switch box is that the electrical appliances ceramic part to handle gentlyand avoid damage6, The bending radius of capillary is not less than 5mm.
三、说明
1、其断开温度及其特性曲线需依客户成品与温控匹配测试而定
2、端子尺寸规格和方向多种多样,毛细管和护套管长度可随客户任意选择
3、为方便客户安装,可焊接不同的直径的感温包
Third, note1, The off temperature and characteristic curve aredefinite according to matching test the temperature control with customer finished product
2,The client canarbitrarilychoose differentdimension specification and direction of terminal、the length ofcapillary and protective tube.3,For the convenient client assembles the thermostat,It can be welded
in the bulb of different diameter.