Opt. 01 | Tracking Generator | Tracking Generator- Frequency Range: 9k~3GHz- Amplitude Range: -50dBm~0dBm- Amplitude Accuracy: ±1dB@100MHz, 0dBm- Amplitude Flatness: ±1dB@0dBm- Harmonics:- Reverse Power: +30dBm- Impedance: Type: N female, 50Ω nominal- RF output VSWR: < 2:1 |
Opt. 02 | Battery pack | *11.1V Li-Ion battery pack *2 |
Opt. 03 | ± 1ppm Stability | *±1ppm, 0~50 °C , ±1ppm/yr |
Opt. 04 | 300Hz RBW | *RBW 300Hz, 3dB bandwidth, RBW Accuracy: 20% |
Opt. 05 | EMI Filter 9kHz & 120kHz RBW(*) | *RBW selections: 9kHz & 120kHz, 6dB bandwidth, Accuracy: 15% |
Opt. 06 | 10kHz & 100kHz RBW (*) | *RBW selections: 10kHz & 100kHz, 3dB bandwidth, Accuracy: 15% |
Opt. 07 | Demodulator (*) | * Demodulation: AM/ FM* Output: Internal speaker, 3.5mm stereo jack wired for mono operation*RBW selection: 10kHz & 100kHz, 3dB bandwidth, Accuracy: 15% |
Opt. 08 | GPIB Interface | *IEEE 488 bus |
Note:1. (*) Only one option can be selection between Opt. 05, 06, 072. All options are factory-installed except opt.02. |
OPTIONAL ACCESSORIES |
ATA-001 | BNC Antenna(An additional ADP-001 is needed for fitting GSP spectrum analyzers) |
ATA-002 | Near Field Probe(An additional ADP-001 & GTL-110 is needed for fitting GSP spectrum analyzers) |
GAP-801 | PreamplifierPreamplifier with 10dB(typical), gain 9kHz ~ 6GHz |
GAP-802 | PreamplifierPreamplifier with 20dB(typical), gain 9kHz ~ 3GHz |
RLB-001 | Return Loss BridgeRLB Frequency Range 10MHz ~ 1GHz |
GTP-3000 | Passive touch Probe SetPR-03: Passive touch probe, SMA(F)ADP-002: Adaptor, SMA(J/F) ~ N(P/M)GTL-303: RF Cable Assembly, SMA(P/M), 600mm |
GKT-001 | General Kit setADP-002: adaptor, SMA(J/F) ~ N(P/M) x 2ATN-100: 10dB attenuator, N(J/F) ~ N(P/M) x 1GTL-303: RF cable assembly(SMA(P/M),RD316,600mm)x2GSC-002: Kit box x 1 |
GKT-002 | CATV Kit setADP-001: adaptor, BNC(J/F) ~ N(P/M) x 2ADP-101: adaptor, BNC(J/F)75Ω ~ BNC(P/M)50Ωx 2GTL-304: RF cable assembly(RG223,N(P/M)-N(J/F),300mm)x2GSC-003: Kit box x 1 |
GKT-003 | RLB Kit setGAK-001: termination 50 , N(P/M) x 1GAK-002: Cap with chain, N(P/M) x 1GTL-302: RF cable assembly(RG223,N(P/M),300mm)x2GSC-004: Kit box x 1 |
GKT-006 | EMI Probe Kit setANT-01: 6cm Loop, H-Field Probe x 1ANT-02: 3cm Loop, H-Field Probe x 1ANT-03 6mm Stub tip, E- Field Probe x 1PR-03: Touch Passive Probe x 1 ADP-02: N(P/M)~SMA(J/F) Adapter x 1ADP-01: N(P/M)~BNC(J/F) Adapter x 1Test Lead: BNC(P/M)~BNC(P/M) RF Cable x 1Test Lead: SMA(P/M)~SMA(P/M) RF Cable x 1 |
GRA-404 | Rack Adapter PanelRack Mounting (19", 4U) |
GSC-001 | Soft Carrying Case |
GTL-301 | RF CableRG 223 N(P/M), 1000mm |
GTL-401 | DC Power CordDC power cord with DC Jack and lighter plug, Current |