CIP610 扬中先锋厂家CIP610 100MHz 示波器探头 隔离探头

类型	数字存储示波器	品Pai	扬中先锋
型号	CIP610	通道数	2
带宽	100（MHz）

CIP610系列 隔离探头 业界一款DC-200MHz隔离探头简介CIP610系列隔离探头由一个安全绝缘的无源探头和一个宽带隔离放大器组成，输入端和输出端之间完全电气隔离或称绝缘,带宽从DC到200MHz，动态范围从1mV到1.5kV，额定隔离耐压600V CATIII/1000V CATII，它是隔离、浮地和差分测试的通用型探头。产品性能DC-200MHz宽带线性隔离技术，输入与输出完全电气隔离额定浮地测量电压600V CATIII/1000V CATII输入端与输出端绝缘电阻大于2000兆欧带宽DC-200MHz，上升时间小于1.8ns极宽动态范围， 从1mV到1.5kV灵活的衰减或放大选择，从1/1000到x1，x5高共模YZ比，适合高压开关脉冲测量输入侧为绝缘改良的传统无源探头，符合使用习惯输出侧可连接任何示波器内置锂电池应用领域开关电源、变频器、UPS不间断电源行业太阳能、风电变流器行业LED灯、路灯、节能灯照明行业高校电力电子、电机实验与科研工业现场测试调试汽车电子系统测试电力设备行业型号与规格

型号	CIP605	CIP610	CIP620
带宽	50MHz	100MHz	200MHz
上升时间	<7ns	<3.5ns	<1.8ns
隔离耐压	AC 3000Vrms/1min ，额定600V CATIII / 1000V CATII
有效测量范围	1.0mV–1.5kV
放大或衰减档位	x5*，x1* ，1/2，1/10，1/20，1/100，1/200，1/1000
输出信号幅值	0～±1.5V
输入阻抗	10MΩ/9pF (当采用10x无源探头)
输出阻抗	50Ω
其他功能	AC/DC开关，超量程报警，电池电压低/充电指示灯
输入探头长度	1500mm
输出电缆长度	300mm
隔离放大器盒尺寸	130mmx46mmx28mm
隔离放大器盒重量	不含电池90g ，带电池180g
工作电源	DC 5V–9V，500mA
充电电源	DC 9V , 800mA
电池	7.4V/2200Mah锂电池

*需配合1:1无源探头实现CIP610 serial Isolation ProbeThe first DC-200MHz Isolation Probe in the IndustryINTRODUCTIONCIP610 serial isolation probe is composed of an insulation-enhanced passive probe and a wideband isolation amplifier. It’s totally electrical isolated between its input and output. The bandwidth is from DC to 200MHz, its dynamic range is from 1mV to 1.5kV,rated for 600V CATIII/1000V CATII floating test. CIP610 serial is a universal tool for isolating test, floating test and differential test.FEATURESPatented DC-200MHz wideband linear isolation technology, electrical isolated between input and output,Insulation voltage 3000V/1min,Rated for 600V CATIII/1000V CATIIWide dynamic range, from 1mV to 1.5kVFlexible attenuationorgain selection, from 1/1000 to x5High CMRR, suitable for high voltage pulse measurementThe input is an insulation-enhanced passive probe, suits user's convenience.Compatible for any oscilloscopeAPPILICATIONSFloating MeasurementsSMPS, UPS, Motor driver DesignPhotovoltaic, Wind turbine Inverters DesignLED Lamp, Road Lamp, CFL DesignElectronic and Electrical engineering EducationAutomotive Design and TestPower equipment design and testSPECIFICATIONS

Model	CIP605	CIP610	CIP620
Bandwidth	50MHz	100MHz	200MHz
Rising Time	<7ns	<3.5ns	<1.8ns
Isolation Voltage	AC 3000Vrms/1min , Rated for 600V CATIII / 1000V CATII
InputDynamic Range	1.0mV – 1.5kV
Gain/Attenuation	x5*，x1*，1/2，1/10，1/20，1/100，1/200，1/1000
Output Voltage	0～±1.5V
Input Impedance	10MΩ/9pF (for 10x probe)
Output Impedance	50Ω
Other Functions	AC/DC Switch，Over Range Alarm，Battery Low/Charge Indicator
Input Leads Length	1500mm
Output Cable Length	300mm
Size of the Isolation Amp	130mmx46mmx28mm
Weight of the Isolation Amp	90g(without battery)，180g(with battery)
Power Supply for Operation	DC 5V–9V，500mA
Power Supply for Charge	DC 9V , 800mA
Battery	7.4V/2200Mah Lithium battery

* Using 1x probe