WaveRunner HRO 64Zi 美国力科WaveRunner HRO 64Zi[信息已过期]_详细资料

产品信息 类型数字示波器品Pai 美国力科 型号 WaveRunner HRO 64Zi 通道数 4 带宽 400（MHz）采样率见参数（GS/s） 记录长度见参数（k）波形捕获率见参数（wfms/s） 外形尺寸见参数（mm）重量见参数（kg） 是否提供加工定制否 Vertical System Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB) 400 MHz (≥2 mV/div) Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB) 400 MHz (typical) Rise Time (typical, 10-90%, 50 Ω) 875 ps (typical) Rise Time (typical, 20-80%, 50 Ω) 650 ps (Typical) Input Channels 4 Bandwidth Limiters 20MHz,100 MHz, 200MHz Input Impedance 50 Ω+/-2% or 1 MΩ||17pF, 10 MΩ || 17 pF with supplied Probe Input Coupling 1 MΩ: AC, DC, GND; 50 Ω: DC, GND Maximum Input Voltage 50 Ω: 5V RMS ± 10V peak 1 MΩ: 400 V max. (DC + peak AC < 10 kHz) Channel-Channel Isolation > 300:1 up to rated BW Vertical Resolution 12 bits; up to 15 bits with enhanced resolution (ERES) Sensitivity 50 Ω: 1 mV-1 V/div, fully variable; 1 MΩ: 1 mV-10 V/div, fully variable DC Vertical Gain Accuracy (Gain Component of DC Accuracy) ±0.5% F.S., offset at 0V Offset Range 50 Ω: ±1.6 V @ 1 mV - 4.95 mV ±4 V @ 5mV - 9.9 mV ±8 V @ 10mV - 19.8 mV ±10 V @ 20mV - 1V 1 MΩ: ±1.6 V @ 1 mV - 4.95 mV ±4 V @ 5mV - 9.9 mV ±8 V @ 10mV - 19.8 mV ±16 V @ 20mV - 100 mV ±80 V @ 102mV - 198 mV ±160 V @ 200mV - 1V ±400V @ 1.02 V-10 V/div DC Vertical Offset Accuracy ±(1% of offset setting +0.2% of full scale + 0.02% max offset + 1 mV) Horizontal System Timebases Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input Time/Division Range Real-Time: 20 ps/div-1600 s/div; RIS mode: 20 ps/div - 10 ns/div; Roll mode: up to 1600 s/div (roll mode is user selectable at ≥100 ms/div and ≤5 MS/s) Clock Accuracy ≤ 1.5 ppm +(aging of 0.5 ppm/yr from last calibration) Time Interval Accuracy < 0.06 / SR + (clock accuracy* Reading) (rms) Trigger and Interpolator Jitter ≤ 6 psrms(typical) <0.1 ps RMS (typical, software assisted) Sample Rate and Delay Time Accuracy Equal to Clock Accuracy Channel-Channel Deskew Range ±9 x time/div. Setting, 100 ms max., each channel External Timebase Reference (Input) 10MHz +/-25ppm via Lbus BNC adaptor External Timebase Reference (Output) 10MHz, 3.5 dBm +/-1dBm, syncronized to reference being used by user (internal or external reference) via Lbus BNC adaptor External Clock DC to 100 MHz; (50 Ω/1 MΩ), EXT BNC input, Minimum rise time and amplitude requirements apply at low frequencies. Acquisition System Single-Shot Sample Rate/Ch 2 GS/s on 4 Ch Random Interleaved Sampling (RIS) 100 GS/s, user selectable for repetitive signals (20 ps/div to 10 ns/div) Maximum Trigger Rate 1,000,000 waveforms/second (in Sequence Mode, up to 4 channels) Intersegment Time 2 us Memory Options (4 Ch / 2 Ch / 1Ch) L-128 Option: 128M / 128M / 128M (60,000) XL - 256 Option: 256M / 256M / 256M (125,000) Standard Memory (4 Ch / 2 Ch / 1Ch) (Number of Segments) 64M/64M/64M (30,000) Acquisition Processing Averaging Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps Enhanced Resolution (ERES) From 12.5 to 15 bits vertical resolution Envelope (Extrema) Envelope, floor, or roof for up to 1 million sweeps Interpolation Linear or Sin x/x Triggering System Modes Normal, Auto, Single, and Stop Sources Any input channel, Ext, Ext/10, or line; slope and level unique to each source (except line trigger) Coupling Mode DC, AC, HFRej, LFRej Pre-trigger Delay 0- of memory size (adjustable in 1% increments of 100 ns) Post-trigger Delay 0-50,000,000,000 divisions in real time mode, limited at slower time/div settings or in roll mode Hold-off by Time From 2 ns up to 20 s or from 1 to 99,999,999 events Internal Trigger Range ±4.1 div from center (typical) Trigger Sensitivity with Edge Trigger (Ch 1¨C4) ProBus Inputs 2 div @ < 400 MHz 1.5 div @ < 200 MHz 0.9 div @ <10 MHz (DC, AC, and LFRej coupling, ≥ 10 mV/div, 50 Ω) External Trigger Sensitivity, (Edge Trigger) 2 div @ < full Bandwidth 1.5 div @ < 300 MHz 1 div @ <200 MHz 0.9 div @<10 MHz (DC, AC, and LFRej coupling) External Trigger Input Range Ext (±0.4 V); Ext/10 (±4 V) Max. Trigger Frequency, SMART Trigger 400 MHz @ ≥ 10 mV/div (minimum triggerable width 1.9 ns) Basic Triggers Edge Triggers when signal meets slope (positive, negative, or either) and level condition. Window Triggers when signal exits a window defined by adjustable thresholds TV-Composite Video Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative). SMART Triggers State or Edge Qualified Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events. Qualified First In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events. Dropout Triggers if signal drops out for longer than selected time between 1 ns and 20 s. Pattern Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input, or 2 channels and external input for 62Xi). Each source can be high, low, or don't care. The High and Low level can be selected independently. Triggers at start or end of the pattern. SMART Triggers with Exclusion Technology Glitch Triggers on positive or negative glitches with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults. Width (Signal or Pattern) Triggers on positive or negative glitches with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults. Interval (Signal or Pattern) Triggers on intervals selectable between 1 ns and 20 s. Timeout (State/Edge Qualified) Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events. Runt Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns. Slew Rate Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns. Exclusion Triggering Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met Cascade (Sequence) Triggering Capability Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. Or Arm on "A" event, then Qualify on "B" then "C" event, and Trigger on "D" event Types A, B, C, or D event: Edge, Glitch, Width, Window, Dropout, Interval, Runt, Slew Rate, Pattern (analog), or Measurement. Holdoff Holdoff between A and B, B and C, C or D, or any is selectable by time or number of events Reset Reset between A and B, B and C, C and D, or any combination is selectable in time or number of events Measurement Trigger Measurement Trigger Trigger on Measurement with qualified limits. Can be used as only trigger or last event in cascade. Low Speed Serial Protocol Triggering (Optional) Optionally available "I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN, LIN, FlexRay, MIL-STD-1553, USB 1.x/2.0 Color Waveform Display Type Color 12.1" widescreen flat panel TFT-Active Matrix with high resolution touch screen Resolution WXGA; 1280 x 800 pixels. Number of traces Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces. Grid Styles Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y Waveform Representation Sample dots joined, or sample dots only Internal Waveform Memory Internal Waveform Memory 4 active waveform memory traces (M1-M4) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity. LeCroy WaveStream? Fast Viewing Mode Intensity 256 Intensity Levels, 1- adjustable via front panel control Types Analog only Number of Channels up to 4 simultaneously Max Sampling Rate 2 GS/s Waveforms/second (continuous) up to 20,000 Waveforms/second Operation Front panel toggle between normal real-time mode and LeCroy WaveStream Fast Viewing mode

您可能感兴趣的产品

WaveRunner HRO 64Zi 美国力科WaveRunner HRO 64Zi[信息已过期]

产品信息

联系我们

关注我们

类型	数字示波器	品Pai	美国力科
型号	WaveRunner HRO 64Zi	通道数	4
带宽	400（MHz）	采样率	见参数（GS/s）
记录长度	见参数（k）	波形捕获率	见参数（wfms/s）
外形尺寸	见参数（mm）	重量	见参数（kg）
是否提供加工定制	否

Vertical System
Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB)	400 MHz (≥2 mV/div)
Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB)	400 MHz (typical)
Rise Time (typical, 10-90%, 50 Ω)	875 ps (typical)
Rise Time (typical, 20-80%, 50 Ω)	650 ps (Typical)
Input Channels	4
Bandwidth Limiters	20MHz,100 MHz, 200MHz
Input Impedance	50 Ω+/-2% or 1 MΩ\|\|17pF, 10 MΩ \|\| 17 pF with supplied Probe
Input Coupling	1 MΩ: AC, DC, GND; 50 Ω: DC, GND
Maximum Input Voltage	50 Ω: 5V RMS ± 10V peak 1 MΩ: 400 V max. (DC + peak AC < 10 kHz)
Channel-Channel Isolation	> 300:1 up to rated BW
Vertical Resolution	12 bits; up to 15 bits with enhanced resolution (ERES)
Sensitivity	50 Ω: 1 mV-1 V/div, fully variable; 1 MΩ: 1 mV-10 V/div, fully variable
DC Vertical Gain Accuracy (Gain Component of DC Accuracy)	±0.5% F.S., offset at 0V
Offset Range	50 Ω: ±1.6 V @ 1 mV - 4.95 mV ±4 V @ 5mV - 9.9 mV ±8 V @ 10mV - 19.8 mV ±10 V @ 20mV - 1V 1 MΩ: ±1.6 V @ 1 mV - 4.95 mV ±4 V @ 5mV - 9.9 mV ±8 V @ 10mV - 19.8 mV ±16 V @ 20mV - 100 mV ±80 V @ 102mV - 198 mV ±160 V @ 200mV - 1V ±400V @ 1.02 V-10 V/div
DC Vertical Offset Accuracy	±(1% of offset setting +0.2% of full scale + 0.02% max offset + 1 mV)

Horizontal System
Timebases	Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
Time/Division Range	Real-Time: 20 ps/div-1600 s/div; RIS mode: 20 ps/div - 10 ns/div; Roll mode: up to 1600 s/div (roll mode is user selectable at ≥100 ms/div and ≤5 MS/s)
Clock Accuracy	≤ 1.5 ppm +(aging of 0.5 ppm/yr from last calibration)
Time Interval Accuracy	< 0.06 / SR + (clock accuracy* Reading) (rms)
Trigger and Interpolator Jitter	≤ 6 psrms(typical) <0.1 ps RMS (typical, software assisted)
Sample Rate and Delay Time Accuracy	Equal to Clock Accuracy
Channel-Channel Deskew Range	±9 x time/div. Setting, 100 ms max., each channel
External Timebase Reference (Input)	10MHz +/-25ppm via Lbus BNC adaptor
External Timebase Reference (Output)	10MHz, 3.5 dBm +/-1dBm, syncronized to reference being used by user (internal or external reference) via Lbus BNC adaptor
External Clock	DC to 100 MHz; (50 Ω/1 MΩ), EXT BNC input, Minimum rise time and amplitude requirements apply at low frequencies.

Acquisition System
Single-Shot Sample Rate/Ch	2 GS/s on 4 Ch
Random Interleaved Sampling (RIS)	100 GS/s, user selectable for repetitive signals (20 ps/div to 10 ns/div)
Maximum Trigger Rate	1,000,000 waveforms/second (in Sequence Mode, up to 4 channels)
Intersegment Time	2 us
Memory Options (4 Ch / 2 Ch / 1Ch)	L-128 Option: 128M / 128M / 128M (60,000) XL - 256 Option: 256M / 256M / 256M (125,000)
Standard Memory (4 Ch / 2 Ch / 1Ch) (Number of Segments)	64M/64M/64M (30,000)

Acquisition Processing
Averaging	Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
Enhanced Resolution (ERES)	From 12.5 to 15 bits vertical resolution
Envelope (Extrema)	Envelope, floor, or roof for up to 1 million sweeps
Interpolation	Linear or Sin x/x

Triggering System
Modes	Normal, Auto, Single, and Stop
Sources	Any input channel, Ext, Ext/10, or line; slope and level unique to each source (except line trigger)
Coupling Mode	DC, AC, HFRej, LFRej
Pre-trigger Delay	0- of memory size (adjustable in 1% increments of 100 ns)
Post-trigger Delay	0-50,000,000,000 divisions in real time mode, limited at slower time/div settings or in roll mode
Hold-off by Time	From 2 ns up to 20 s or from 1 to 99,999,999 events
Internal Trigger Range	±4.1 div from center (typical)
Trigger Sensitivity with Edge Trigger (Ch 1¨C4) ProBus Inputs	2 div @ < 400 MHz 1.5 div @ < 200 MHz 0.9 div @ <10 MHz (DC, AC, and LFRej coupling, ≥ 10 mV/div, 50 Ω)
External Trigger Sensitivity, (Edge Trigger)	2 div @ < full Bandwidth 1.5 div @ < 300 MHz 1 div @ <200 MHz 0.9 div @<10 MHz (DC, AC, and LFRej coupling)
External Trigger Input Range	Ext (±0.4 V); Ext/10 (±4 V)
Max. Trigger Frequency, SMART Trigger	400 MHz @ ≥ 10 mV/div (minimum triggerable width 1.9 ns)

Basic Triggers
Edge	Triggers when signal meets slope (positive, negative, or either) and level condition.
Window	Triggers when signal exits a window defined by adjustable thresholds
TV-Composite Video	Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative).

SMART Triggers
State or Edge Qualified	Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
Qualified First	In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events.
Dropout	Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
Pattern	Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input, or 2 channels and external input for 62Xi). Each source can be high, low, or don't care. The High and Low level can be selected independently. Triggers at start or end of the pattern.

SMART Triggers with Exclusion Technology
Glitch	Triggers on positive or negative glitches with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
Width (Signal or Pattern)	Triggers on positive or negative glitches with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
Interval (Signal or Pattern)	Triggers on intervals selectable between 1 ns and 20 s.
Timeout (State/Edge Qualified)	Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
Runt	Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
Slew Rate	Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
Exclusion Triggering	Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met

Cascade (Sequence) Triggering
Capability	Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. Or Arm on "A" event, then Qualify on "B" then "C" event, and Trigger on "D" event
Types	A, B, C, or D event: Edge, Glitch, Width, Window, Dropout, Interval, Runt, Slew Rate, Pattern (analog), or Measurement.
Holdoff	Holdoff between A and B, B and C, C or D, or any is selectable by time or number of events
Reset	Reset between A and B, B and C, C and D, or any combination is selectable in time or number of events

Measurement Trigger
Measurement Trigger	Trigger on Measurement with qualified limits. Can be used as only trigger or last event in cascade.

Low Speed Serial Protocol Triggering (Optional)
Optionally available	"I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN, LIN, FlexRay, MIL-STD-1553, USB 1.x/2.0

Color Waveform Display
Type	Color 12.1" widescreen flat panel TFT-Active Matrix with high resolution touch screen
Resolution	WXGA; 1280 x 800 pixels.
Number of traces	Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
Grid Styles	Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y
Waveform Representation	Sample dots joined, or sample dots only

Internal Waveform Memory
Internal Waveform Memory	4 active waveform memory traces (M1-M4) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity.

LeCroy WaveStream? Fast Viewing Mode
Intensity	256 Intensity Levels, 1- adjustable via front panel control
Types	Analog only
Number of Channels	up to 4 simultaneously
Max Sampling Rate	2 GS/s
Waveforms/second (continuous)	up to 20,000 Waveforms/second
Operation	Front panel toggle between normal real-time mode and LeCroy WaveStream Fast Viewing mode