80i-110s 交/直流电流钳描述：AC/DC Current clampThe 80I-110s is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope, Multimeter, or other voltage measurement device that has the following features: BNC input connectors or if using a meter convert the banana plugs to a
80i-110s 交/直流电流钳描述：AC/DC Current clamp
The 80I-110s is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope, Multimeter, or other voltage measurement device that has the following features: BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter PM9081/001.
- Current Range: 0.1 to 100A DC or 0.1 to 70A AC
- Basic Accuracy （DC to 1kHz）:
100mV/A setting: 50mA to 10A +/- 3% of reading + 50mA
10mV/A setting: 50mA to 40A +/- 4% of reading + 50mA
40A to 80A +/- 12% of reading + 50mA
80 to 100A +/- 15% of reading - Output Signal: 10A range: 100mV/A | 100A range: 10mV/A
- Bandwidth: 1Hz to 20kHz
- Working Voltage: 600V AC rms
- Maximum Conductor Size: 11.8 mm （.46 inch） diameter
- Safety Rating: IEC 1010 ａnd CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V
技术指导： | Specifications |
| Nominal current range |
|
| Continuous current range | | | 0.1 A - 10 A AC/DC | | | 1 A - 100 A AC/DC |
|
| Maximum Non-Destructive Current |
|
| Lowest measurable current |
|
| Basic Accuracy | | | 3% + 50 mA （@ 10 A） | | | （% reading + floorspec） |
|
| Useable frequency |
|
| Output level（s） |
|
| Zero error adjustment |
|
| Safety Specifications |
| Safety | | | CAT II, 600 V | | | CAT III, 300 V |
|
| Maximum voltage |
|
| Mechanical & General Specifications |
| Warranty |
|
| Battery Life |
|
| Maximum conductor diameter |
|
| Output cable length |
|
| BNC Adapter |
|
型号配件：
沪公网安备 31011502008050号
