英国 SOLO 424-001 热探测器测试器 品Pai

　英国SOLO 425-001 热探测器测试器 报价

　　专业的国际采购员，优势价格，不仅如此，我公司是以空运的方式，在货期上取胜，如果您急需某项进口产品，我们是你非常好的选择，快速的将货物送到您的手中!您的来电是合作的开始。

　　Remedial action ａnd records As well as the routine maintenance that we always think about, there is the need to keep the fire alarm system optimised. This depends heavily on the competence of the maintenance technician, ａnd his familiarity with the many issues that can detrimentally affect a fire alarm/detection system. Some of the areas that need consideration are:

　　补救措施和记录以及我们一直考虑的日常维护，有必要保持火灾报警系统的优化。这在很大程度上取决于维修技术人员的能力，以及他对许多可能对火灾报警/检测系统产生不利影响的问题的熟悉程度。需要考虑的一些方面包括：

　　● change of use of a room or rooms or whole building

　　● refurbishing/redecoration

　　● building alterations

　　● obstruction of air flow

　　● introduction of hazardous materials

　　● change of tenant

　　● change of escape arrangements

　　● ageing equipment

　　● addition of sound insulation

　　● causes of false alarms

　　● causes of false alarms In addition, there is the general deterioration of pieces of equipment that can occur due to normal operation. For instance, the electrochemical cell used in CO detectors deteriorates at different rates depending on the environment to which it is exposed.

　　●改变一个或多个房间或整个建筑物的使用

　　●翻新/重新装修

　　●建筑改造

　　●气流受阻

　　●危险材料介绍

　　●承租人变更

　　●逃生安排的变更

　　●老化设备

　　●增加隔音材料

　　●错误警报的原因

　　●错误报警的原因。此外，正常运行可能导致设备部件的一般损坏。例如，一氧化碳探测器中使用的电化学电池根据其暴露的环境以不同的速率退化。

　　The point about all this is that the fire alarm ａnd detection system is a ＇living＇ system ａnd as such, it needs to be constantly reviewed to make sure it is ready ａnd able to fulfil its purpose. If, for instance, some new offices are installed in an open plan area without detection being installed, a fire could start in one of the offices ａnd would not be detected until it burst out of the room at an already advanced stage of development. This could then result in people being trapped ａnd even killed by having their escape route cut off.

　　英国SOLO 425-001 热探测器测试器 报价

　　所有这些的要点是，火灾报警和探测系统是一个“活的”系统，因此，需要不断地对其进行审查，以确保其准备就绪并能够实现其目的。例如，如果一些新办公室安装在开放式平面区域，而没有安装检测装置，那么其中一个办公室可能会发生火灾，直到火灾在已经发展的高级阶段从房间中爆发时才会被检测到。这可能导致人们被困，甚至被切断他们的逃生路线杀害。