Model D10is offered by Gardco as an improvement over existing washability machines.型号D10是通过Gardco提供在现有的耐洗机的改进。It is a single cycle rate (cyc/min) machine with all of the other advantages listed (see "Characteristics Common To All Models") for the entire Gardco line of Linear Motion Test Equipment.它是一个周期率（CYC /分钟）机器与所有上市的其他优势为整个Gardco直线运动测试设备（见“所有型号的共同特征”）。
Model D16is basically the same as Model D10 except it provides a six inch longer stroke length and accommodates a longer test panel.型号D16基本上是作为D10的型号相同，但它提供了一个六英寸较长的行程长度，可容纳一个较长的测试面板。
Set Speed:37 Cycle Rate设置速度：37周期率
Designed for Present Day Washability Tests:Applicable to all present set speed 37 cycle rate tests called for in various specifications.专为目前的日耐洗测试：适用于所有目前设定的速度37周期率各种规格要求的测试。
ASTM Specifications:Applicable to tests calling for use of 37 cycle rate Washability machines.ASTM标准：适用于要求使用37周期率洗刷机器的测试。
FTMS, MIL, ISO and Other Specifications:Also applicable to tests calling for set rate, 37 cycle machines.FTMS，MIL，国际标准化组织（ISO）和其他规格也适用于测试要求设定的速度，37个循环机。
Runs Three Tests Simultaneously:Up to three multiple specimen tests possible.同时运行三个测试：三多个试样测试成为可能。
Model D16 Only仅型号D16
Long Stroke Length:16"长冲程长度：16“Accommodates Longer Test Panels:Stroke is designed for long panel washability tests possibly called for in future specifications.可容纳较长的测试面板：中风是长面板的耐洗性测试可能呼吁，在未来的规范设计。
Technical Data技术数据
Model D10型号D10
Model D16型号D16
Stroke Length:行程长度：
10"10“
16"16“
Acceleration Distance Minimum:加速距离Z小：
1.1"1.1“
1.2"1.2“
Acceleration Distance Maximum:加速距离Z大：
1.5"1.5“
1.2"1.2“
Cycles Per Minute:每分钟：
3737
3737
Velocity, in./sec.:速度，英寸/秒。
1414
2222
Drive Fork Force Maximum lbs.:驱动器叉力Z大磅。
2424
1717
变速模式（五）
Models D10 & D16机型D10和D16
The variable speed models have all of the features as the set speed models, plus variable speed.变速模式，所有设定的速度模型的特点，加上变速。Each model has its own stroke length for its particular application.每个模型都有其特定的应用程序自己的行程长度。The stroke length is centered and shortened from both sides.行程长度为ZX，双方缩短。Rate limits shown for all variable cycle rate (cyc/min) machines are factory set, but may be shifted for specific requirements.所有变量的周期率（CYC /分钟）的机器显示的速率限制的出厂设置，但可能转移的具体要求。Instructions for this change are furnished with the unit.这种变化说明，与单位提供。
Model D12V, when fitted with the test sample tray serves as a laboratory machine.D12V，型号与安装测试样品盘，作为一个实验室机。This model has the base cutout feature.这种模式的基本断流功能。When the tray is removed, an extended drive fork may be added to pass through an opening in the base plate.当托盘被删除，扩展的驱动器叉可能被添加到通过在底板上的开放。This permits a test to be conducted directly on the surface on which the machine is placed.这允许机器被放置在其上表面直接进行测试。Stainless steel handles are attached to the ends of the housing to enhance portability for field use.不锈钢手柄连接到两端的房屋，以提高现场使用的可移植性。
Variable Set Control:Allows accelerated testing.变量设置控制：允许加速试验。Possibly called for in future specifications.可能是所谓的，在未来的规范。Designed for Present Day Washability Tests:Applicable to all present set speed 37 cycle rate tests called for in various specifications.专为目前的日耐洗测试：适用于所有目前设定的速度37周期率各种规格要求的测试。ASTM Specifications:Applicable to tests calling for use of 37 cycle rate Washability machines.FTMS, MIL, ISO and Other Specifications:Also applicable to tests calling for set rate, 37 cycle machines.ASTM标准：适用于测试，要求使用37周期率洗刷机器FTMS，MIL，国际标准化组织（ISO）和其他规格：也适用于测试要求设定的速度，37个循环机。Runs Three Tests Simultaneously:Up to three multiple specimen tests possible.同时运行三个测试：三多个试样测试成为可能。
Model D12V Only仅示范D12V
Base Cutout Feature:Allows test to be made directly on surface on which machine is placed; such as a ship deck or mall floor.基地的抠图功能：允许测试，直接在机上放置表面，如船甲板上或商场一楼。Use on Site / in Lab:Extended fork is required when tests are made through cutout base.现场使用/在实验室测试时，需要通过剪影基地扩展叉。All models come with standard fork unless extended is specified.所有型号都标准货叉，除非指定扩展。Handles:For portability to test site.把手：为了可移植性测试网站。
Technical Data技术数据
D7VD7V
D8VD8V
D9VD9V
D10VD10V
D12VD12V
D16VD16V
Stroke Length:行程长度：
7"7“
8"8“
9"9“
10"10“
12"12“
16"16“
Acceleration Distance:加速距离：
1.1"1.1“
1.1"1.1“
1.2"1.2“
1.3"1.3“
1.2"1.2“
1.5"1.5“
Cycles per Minute Mini.:每分钟迷你周期。
77
6.56.5
66
66
55
4.54.5
Cycles per Minute Max.:每分钟Z大循环。
7070
6565
6060
6060
5050
4545
Velocity, in./sec.速度，英寸/秒。Mini.:迷你。
22
22
22
2.32.3
2.22.2
2.72.7
Velocity, in./sec.速度，英寸/秒。Max.:Z大：
2020
2020
2020
2323
2222
2727
Drive Fork Force Max.驱动叉队Z大。lbs.:英镑。
5252
4949
4949
4545
4545
3737
变速/力传感（VF）
A Few Applications On-Site or in the Laboratory在现场或实验室中的几个应用程序
0
A Few Applications On-Site or in the Laboratory在现场或实验室中的几个应用程序
1
A Few Applications On-Site or in the Laboratory在现场或实验室中的几个应用程序
2变速/力传感/接口（VFI）
A Few Applications On-Site or in the Laboratory在现场或实验室中的几个应用程序
沪公网安备 31011502008050号
