实木复合门的安装验收标准和注意事项

A, the door installation:
1, the door assembly connection, should be strict, level off, without black seam; Fixed parts should lock; Within 2 meters door cover diagonal should be accurate, allow the tolerance of 1 mm or less, more than 2 meters allow 1.5 mm or less;
2, door sets, should be vertical, three-dimensional horizontal straightness tolerance + 2 mm, horizontal straightness tolerance allowed + 1 mm; Gap between the door ａnd the wall with foamed double-sided sealing glue, plastic foam should be painted, dry cutting is flat ａnd level.
Second, the set of installation:
1, line installation should be uniform coating ａnd door cover, wall body is fixed, set the line outlet should level off, close, no crack, installed on the same side of line in a plane; Because wall is at ordinary times, must ensure that the set of flat line interface. Set of camber line allowed tolerance of 1 mm. Set of line with walling crack sealant caulking processing.
Three, door leaf installation:
1, the door leaf after installation, should level off, vertical, doors ａnd door cover exposed faces flat; Doors open the same ring, switch freely;
2, gap between the door ａnd the door leaf, the seam for 6 to 8 mm, the rest of the trilateral to 3 mm; All gap tolerance + 0.5 mm;
Article 3, after the doors locked ａnd sealed tightly bound, ａnd does not wobble.
4, hardware:
1, the door hinge should be vertical ａnd flat; The flat hinge should be on doors ａnd door cover corresponding to the slot, the slot should be specifications, size the same as the hinge, the trilateral allowable tolerance + 0.5, after fit up flat without aperture, should be flexible hinge open freely. Trigeminal hinge according to the mold installation, bolt should be put in place. Hinge fixed screws should be packed full, straight, hidden in the hinge plane.
2, lock slot should be accurate, specifications, size is consistent with the lock body, lock plate; Door locks installed should be tightened, the lock is ringing; Accessories installation is complete, the fixed screw shall be entirely flat.
3, suck, door closer, handle, etc shall be installed in the specified location, installation is firm, fixed bolts shall be installed, straight, installed after the fitting effect is good.
Five, the appearance:
1, cover, door line combined with ground gap should be less than 3 mm, with waterproof sealant sealing slit.
2 has grown two millimeters, the door is installed, must be smooth uniform, open ａnd flexible, the overall effect is good, no scratches.

网址：http://www.lcscmy.com/