AP48，ap48 kit AP48 48-Well Micro Chemotaxis Chamb...

Neuro Probe AP48 chemotaxis chamber可重复利用的MB系列趋化小室产品

可重复利用的MB系列趋化小室产品可以用于趋化实验，肿瘤细胞的侵袭实验及细胞与细胞的相互作用的研究。

In the Neuro Probe AP48 chemotaxis chamber, chemoattractants added to the lower wells act on cells in a suspension added to the upper wells. A filter separates the upper and lower wells. After incubation the migrated adherent cells on the underside of the filter are stained and counted.

The AP48 consists of precision-machined acrylic top and bottom plates, assembly hardware, and a silicone gasket. The bottom plate has 48 wells, each with 25µL volume and a diameter of 3.2mm. Corresponding holes in the top plate form the upper wells when the chamber is assembled. A single 25 x 80mm piece of filter membrane is placed between the top and bottom plates, and a gasket is positioned over the filter to create a seal. Narrow raised rims around mating surfaces of top and bottom wells enhance the seal.

Before the migrated cells can be stained and counted, the nonmigrated cells must be wiped off the top side of the filter. An accessory pack (stock # P48AP)includes instruments for this purpose.

The AP48 is designed for use with polycarbonate and cellulose nitrate filters. Please note that we also sell the AC48, a 48-well chamber specially designed for use with cellulose nitrate filters

Accompanying each chamber is an AP48 protocol for its use and care.

AP48 Kit

The AP48 Kit is a convenient, cost effective combination of the most popular items in our line of 48-well reusable chemotaxis instruments, filters, and accessories. You provide the cells, reagents, and stain.

The Kit includes:

•  (1) AP48 microchemotaxis chamber,
•  (1) P48AP accessory pack for handling polycarbonate filters, including:
  • (1) filter wiper for mounting on a ring stand
  • (1) large plastic filter clamp,
  • (1) small stainless steel filter clamp
  • (2) curved stainless steel forceps
  • Filter options —  A: (100 ) pieces of 3µm, 5µm or 8µm,  25x80mm filters; or B: (50) pieces each of 2 of the 3 pore sizes (3µm, 5µm and 8µm). Please enter your filter option in the Order Notes field on the Checkout screen.

NOTE – the AP48 is designed for use with adherent cells that will be counted visually on the bottom of the filter after migration. If you will be using non-adherent cells, or wish to count cells with a microplate reader, please see the ChemoTx® system or the MB-series 96-well chambers, or contact us for assistance.