导电银笔Conductive Silver Pen
导电银笔可以随时方便的制造银导电轨迹,适合SEM样本制备。特制的阀门可以保证银轨迹平滑且不易堵塞。每只笔可以生产100英尺的轨迹,银含量在39%-45%之间。
12644-01 | Conductive Silver Pen导电银笔 | each |
12644-02 | Conductive Silver Pen, Micro tip 导电银笔 | each |
Technical Information
Composition properties:
Assay | 45-50% Silver |
Silver Particle Size | <10 microns |
Setting Rate | <2mm/Hr |
Thinner | Butyl Acetate |
Cured Properties:
Resistivity | 0.03-0.05 Ohm/sq @ 1mil |
Adhesion | Excellent to good |
Solder Wetting | 2-3 Seconds |
Solder Leach Wetting | <5 seconds |
Use Procedures
Drying : Air dry in 3-5 minutes at room temperature. Maximum air dry conductivity after 20-30 minutes. Heat cure in 3-5 minutes at 250-300°F (121-148°C) for maximum conductivity.
Soldering : 350°F(176°C) for<5 seconds after heat cure. Use low temperature solder and a low temperature soldering iron for best results. Hand soldering at higher temperatures is not recommended.
Traces : Standard tip traces as narrow as 1/26” in width.
Amoun t: Approximay 100 feet of conductive repairs, jumpers and shielding
Shelf Life : six months from first use. Unopened shelf life is 18 months from manufacture
Resistivity | 0.03-0.05 Ohm/sq @ 1mil |
Adhesion | Excellent to good |
Solder Wetting | 2-3 Seconds |