WYP系列 温控器

品Pai	恒冠	型号	WYP
类型	液体膨胀式	开关类型	常闭
工作电压	125----250（V）	过载电流	16（A）
动作温度	-35-----+320（℃）	寿命	100000（次）
产品认证	CQC、VDE、CE、UL、GS

型号：WYP系列
产品名称:温控器
产品关键词:温控器，温度控制开关，机械式温度控制器，液体膨胀式温度控制器
           Thermostat, Thermostat switch,mechanical temperature controller,
           Liquid expansion temperature controller
行业及产品类目: Home appliance-Home appliacce parts
产品简要描述及优势:
1、电气性能：16A-250V/AC
2、断开温度：根据用户的要求，温度设计范围(50℃～+320℃)（调温器）
             50℃～320℃手动复位（限温器）
3、产品寿命：>10万次（调温器）
>6000次（限温器）
4、主体Z高耐温：150℃
Specification
1.Electrical performance:16A-250V/AC
2.Temperature range: 50℃～+320℃(thermosistor)
                        50℃～320℃(temperature Limiter, manual reset)
3Diff: according to the customer requirement.
4. Life: >100,000 times(Thermosistor)
         >6000 times (Temperature lmiter, manual reset)
5. Side of boay: 150℃
产品详细描述:
一、原理性能和用途
原理性能：是当被控制对象的温度发生变化时使温控器感温部内的工质产生相应的热胀冷缩的物理现象（工质体积变化），与感温部连通一起的膜盒产生膨胀或收缩。通过杠杆原理，带动开关通断动作，达到恒温目的。当被控制对象的温度达到设定安全值时，开关可断开动作，达到限温目的，人工手动复位，泄露自动保护。WYH系列液胀式温控器具有控温准确，稳定可靠，开停温差小，控温调节范围大，限温可靠超载电流大，泄露自动保护等性能特点。
用途：主要用于自动开水器、电烤箱、电热油炸锅、食品机械、厨房冷柜等控温用。
Principle of performance andApplication
When the temperature of the controlled object is changed,the inner working
substanceof thermostatsensible bulbproduce a corresponding thermal expansion and contraction physical  phenomenon (theworking substancevolume change), at which connected withthe diaphragm of sensible bulb producesexpansion or contraction.Through the leverage to drive switch on/off action, the purpose is to achieve constant temperature.WYH
series thermostats have temperature control accurate, reliable,  smalldifferential, temperature adjustment range, and large overload currentperformance characteristics.
Usage:to beapplied tokitchen freezer, chiller, refrigerator, ice
machine, fishpond for temperature control use.
Usage: to beapplied tokitchen freezer, chiller, refrigerator, ice machine, fishpond for temperature control use.
Usage: to beapplied to electric water heater, boiler,electronic
oven,frying pan,food machinery and kitchen refrigerator for temperature control use.三、注意事项：
1、用户必须根据自己产品的特点，所需控制的温度，提出订货型号和规格。
2、温控器安装时，感温管尽可能整支贴紧被控温表面，以达到控温准确的目的。
3、安装时不可将感温管压变形，以免影响其性能。
4、勿使导电气体或导电物质进入温控器内或污染温控器表面以免影响电气绝缘性能。
5、安装支架的M4机丝不要过长，否则会破坏温控器性能。
6、开关盒是电器陶瓷件要轻拿轻放，避免破坏。
7、毛细管折弯半径不能小于5mm.
Attentions
1,The client must be based onthe characteristics of their products,what needed the temperature controlling, brought forward the type and specification ordering goods
2, The whole bulb is supported closely alignscontrolled temperature
surfacewhile thermostat installation, to achieve accurate
temperature control purposes.3, The installation must not be a bulb pressure deformation, so as
notto affect its performance.4,Don't make electricity gas and electricity material in a thermostat   or contaminated thermostat surface to avoid affect the electrical
insulating performance.5, The M4 screw of mounting brackets is not too long, otherwise it
will damage thermostat performance.6,Switch box is that the electrical appliances ceramic part to
handlegentlyand avoid damage7, The bending radius of capillary is not less than 5mm.
四、说明
1、转轴尺寸规格及其起始旋转角度需依客户之需求来设定
2、其断开温度及其特性曲线需依客户成品与温控匹配测试而定
3、端子尺寸规格和方向多种多样，毛细管和护套管长度可随客户任意选择
4、为方便客户安装温控器，温控器中还可焊接不同的直径的感温包
Third, note
1, The shaft sizes and rotation angles is to be set according to customer  
demand
2, The off temperature and characteristic curve aredefinite according to matching test the temperature control with customer finished product
3,The client canarbitrarilychoose differentdimension specification and direction of terminal、the length ofcapillary and protective tube.4,For the convenient client assembles the thermostat,It can be welded  
in the bulb of different diameter.